Try a test area first to ensure that colour and adhesion are acceptable. Colour testers are available to assist in your colour choice. Please note that the colour in the can may be different to the final shade when dry. MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION. Test a small area first for colour and adhesion: Colour the final colour will depend upon the type of surface, previous treatment and number of coats applied. If using more than one can it is advisable to mix them together in a container or finish in a corner before starting a new can. Adhesion: if adhesion is inadequate on previously coated surfaces, lightly sand before application.

We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty ItemsUntreated wood: should be pre-treated prior to adhesion test with an appropriate wood preserver to prevent rot and decay. Please note that during particularly busy periods, it may take a little longer to receive your delivery and our carrier may attempt to deliver to you on a Saturday. Faster Delivery Stir thoroughly before pouring contents into a Cuprinol sprayer. Overspraying surrounding areas can be minimized by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent. Cuprinol Garden Shades 1L has been specially developed to colour and protect sheds, fences and other garden wood. Its special pigments ensure a rich colour and allow the natural texture of the wood grain to shine through. A favourite with our Next Day Paint customers so far has been Muted Clay by Cuprinol Garden Shades. This is such a versatile colour, great for painting sheds, summer houses, garden furniture and fences alike.

As Garden Shades often goes on directly to the wood, without a primer, sometimes it will soak deep into the wood and this can create the need for a third coat. This may be noticeable with rougher woods, open end grains or indeed deep colours. If wood has been exposed and dried out for a long period of time, this may also draw the more of the product away from the surface and into the wood structure.USAGE GUIDE: A minimum of two coats is required, subsequent coats must be applied on the same day no longer than 8 hours apart. If that'snot possible then lightly sand down the surface before overcoating to ensure adhesion. CLEAN: Reseal can after use. Clean up spills while still wet. After use, remove as much product as possible from brushes before cleaning with water. Do not store or use in extremes of temperature and protect from frost. Working days are defined as Monday-Friday 8am-7pm inclusive, excluding Saturday, Sunday and Public Holidays.

APPLICATION: Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. Be mindful that it is waxed-enriched and that once these waxes are dried, they act to repel liquids, which would include an additional coats. Don't try to coat the whole project with one coat before getting onto the next coat. Instead it is better to paint sections in in time chunks of 2-4 hours.

2.5 Litre Tinted Colour

Please note some larger products are delivered to kerb-side (the street outside your home), it is at the drivers discretion if they can deliver the item to another location on the property.