The focus preset function is possible for Live View shooting only when using a (super) telephoto lens equipped with the focus preset mode, available since the second half of 2011. When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Move the AF point. Use the < > to move the AF point to where you want to focus. (It cannot be moved to the edge of the screen. Press < > or < > to return the AF point to the center.

In [FlexiZone - Single AF], the camera focuses with a single AF point. This is effective when you want to focus on a particular subject. If multiple faces are detected, [ ] is displayed. Use < > to move the [ ] frame over the face you want to focus on. Note: Depending on the [ : Aspect ratio], the number of AF points varies. At [3:2], there are 31 AF points. At [4:3] and [1:1], there are 25 AF points. And at [16:9], 21 AF points. Also, at [16:9], there are three zones. For movie shooting, there are 21 AF points (or 25 AF points if [640x480] is set) and three zones (or nine zones if [640x480] is set). Even if a low ISO speed is set, noise may be noticeable in the displayed Live View image under low light. However, when you shoot, the image recorded will have minimal noise. (The image quality of the Live View image is different from that of the recorded image.)We believe even small surprises can light a day. This is why we devote to providing you with high-quality products and best services at the lowest prices. Use manual focus when shooting a static scene where you need ultimate control over the point of focus.

The AF point < > ( ) appears. During movie shooting, if [Movie Servo AF] is set to [Enable], the AF point is displayed in a larger size.

Use AF (FlexiZone - Multi) to focus

Our servers are getting hit pretty hard right now. To continue shopping, enter the characters as they are shown You can use the LCD screen on your camera to view the image when shooting photos and movies. This is called Live View. It is best to use Live View with a tripod to minimize camera shake when you press the shutter button. Pressing < > or the < > button toggles between automatic selection and zone selection. In < > mode, automatic selection is set automatically. Press the shutter button halfway to focus. When focus is achieved, the AF point turns green and the camera beeps. The AF point turns orange if the camera cannot focus.

Aim the AF point over the subject, then press the shutter button halfway and hold it.When focus is achieved, the AF point turns green and the camera beeps. The AF point turns orange if the camera cannot focus.

If Live View shooting is used continuously for a prolonged period, the cameras temperature may rise, and image quality may deteriorate. Always exit Live View shooting when you are not shooting. You can magnify the image and focus precisely with manual focus. This is useful with a stationary subject.

Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point turns green and the camera beeps. The AF point turns orange if the camera cannot focus. FlexiZone - Multi] is an AF method that makes it easy to focus on a moving subject. You can focus over a wide area with up to 31 AF points (automatic selection). This wide area can also be divided into 9 zones for focusing (zone selection).