Now you have the capability of cutting with either side of your song which comes in handy because sometimes it's helpful to have that option First off, make sure you turn off the saw. I know it’s tempting to leave it running for a few seconds after you’ve finished, just for the sweet sound it makes. But the last thing you want is for the blade to accidently keep on going and mess up your beautiful straight line. Keeping everyone away from the place of your work is more than necessary. The safety measures that I have mentioned, are obvious for you to take. Accuracy: Look for a straight edge that is accurate and won't flex or bend as you cut. This will help ensure your cuts are precise and clean.

Although it appears to work really well on the 4 foot length I find that on an 8 foot length of the center of the guide will bow from the pressure of the saw blade may be up to an entire blade with so you’re not getting a perfect straight hitch. Supplemental bracing is often used. The question is will this Craig straight edge Reply Slide both connector bars about halfway into the groove in the guide rail with the clamp. Repeat for the other side. Then, press the trigger and push forward ever so slowly. Make sure you keep the saw firmly against your guide until the end of the cut. And speaking of the end, don’t forget to cut until the end of your guide.When you have finished sanding, use a shop cloth to wipe down the edges and make sure there are no rough bits that you may have missed. Once you have done this, give your masterpiece a final once over with a soft cloth. This will help to bring out the shine and make sure everything looks perfect. I know a lot of us out there are used to our work surfaces being scratched; it’s an unavoidable consequence of using a circular saw. However, a guide rail can help keep your work surface unblemished. Guide rails will keep brand new work surfaces looking pristine since the base of the saw will not scratch on the work surface. Circular saw guides come in several different lengths and widths. The larger ones are geared towards professional woodworkers, while shorter and narrower ones are better suited for everyday DIY home improvement tasks. Durable: It is made of high-grade aluminum. Thus, this robust clamp will deliver long-lasting performance.

Finding the right guide rail for your circular saw involves taking a close look at intricate details like materials, build quality, length, width, and ease of use. Most importantly, it should be compatible with the power tools you have at home (or plan on buying). To make sure you don’t make a costly mistake in your hunt for a saw guide, follow this buyer’s guide carefully! Factors to Keep in Mind Material Length: The length of your straight edge will depend on the size of your saw and the size of the material you're cutting. Make sure to measure your saw's base plate and the length of the material you'll be cutting to ensure you get the right length. Then, move the saw and mark the baseplate on the front edge of the plywood. Step 2. Position the Guide RailNow it’s fine if you forget to unplug it, and you can still finish your job, but pretend like you haven’t heard me say that, okay? It’s for your own safety.

But for me, I think it’s easier to place the edge of the DIY crosscut jig on top of my marks than it is to line up the cutline indicators of the Straight Edge Guide next to my marks.

10 Best Straight Edge For Circular Saw

Slide the clamp against the plywood. Then, use one hand to hold the clamp against the plywood and use the other hand to pull the handle to tighten the clamp. Straight Edge: The self-clamping straight edge design makes the E. Emerson Tool Co. CXW 2 Guide incredibly strong and light-weighted. NOTE: I had to loosen the set screws so that I could slide the next guide rail over the connector bars.