While a roller or paint brush can produce great results with a bit of effort, paint sprayers are far more efficient when it comes to painting larger areas, and can help relieve some of the traditional struggles that come with painting a wall, fence or furniture. There is, however, an art to spray painting and a bit of a learning curve, so a few practice runs may be required before attempting to paint the desired area.

If you fancy going all out on your latest DIY paint project then this powerful airless paint sprayer could just be what you're looking for. A few helpful accessories you might need at some point include a needle to clear the nozzles from paint and other materials to prevent clogging and a small funnel to perform a viscosity test. This way, you’ll be able to define whether the paint needs dilution or not before you fill it into the container. Speaking of which, the paint reservoir boasts a generous 1.3L capacity, again, making the tool a winning choice for treating larger areas and surfaces. Finally, an added sponge filter prevents dust buildup and works to prolong the motor service life. If you are going to use the sprayer on different materials, please, pay close attention to the types of nozzles and compatible surfaces. If you use metallic paint, the paint sprayer gun with a nozzle of 1.2-1.3 mm will be the most suitable option. The best choice for varnish and acrylic paints is a sprayer gun with a 1.4-1.5 mm nozzle. And finally, the paint sprayer gun with the biggest size (1.7-2.0 mm nozzle) will be perfect for the putty. As a rule, most pneumatic and air spray guns are compatible with all materials! But if you choose to buy an airless sprayer, you should definitely consider the surfaces it's going to be most efficient for. Tank position Remove nozzles, hoses, and paint containers and rinse until the water is clear. For nozzles use a pipe cleaner or stiff brush to make sure it’s clean. The same principle applies to oil-based paints, but you will need a solvent/brush cleaner and plenty of it to clean your equipment. Then you will need to rinse. with warm water. This can be messy and time-consuming, but it needs to be done properly. Is it worth investing in a paint sprayer?Having chosen the air or pneumatic sprayer, you should pay attention to its principle of operation. HP (High Pressure) technology ensures that you can paint fast. Yet, the applied paint would cover only about 45% of the surface and further spraying would be still needed. HVLP (High Volume / Low Pressure) technology is well supported in many appliances. The technique implies that the air inside a sprayer moves under high pressure but at the output it gets rarified. That adds to the efficiency and spraying over 65% surface at a time. Pressure Whether you are an experienced DIYer or just a diligent homeowner, a paint sprayer is a handy and functional tool to have in your arsenal. And if you want a versatile device with a great multi-tasker potential, a paint sprayer from Tilswall will get you covered.

If your repair project isn't only about painting, you might also want to consider these cordless drills. Battery-powered and pretty lightweight, these drills can be used pretty much everywhere. What Features to Compare Types of paint sprayer Airless paint sprayer: This type of sprayer produces a mist of paint and it does so in two different ways. One way blows a combination of paint and air through a nozzle or tip, and the other way is to push paint through a small opening using high pressure. An airless paint sprayer can be up to 10 times faster than a brush or roller in completing a paint job. It also produces an even coat of paint on all surfaces, leaving a consistent, high-quality finish.

Discover the best paint sprayers to help turbo charge even the biggest DIY painting projects

Yes, if you want the finish it offers, but you will need to make sure you look after your equipment. How we review the best paint sprayers