Steeda UK are the leading name in Ford Performance in the UK, the official arm of Steeda in the UK and the top Mustang specialist located here. Please measure your nuts to be sure - alternatively, pick up our Schwaben 5 Piece Strut Nut Socket Set ES2703013 and be covered for all common sizes. This allows for an allen key or box wrench to hold the shaft while the nut is torqued to the correct specification. Since it has a hex shape on the top, it is possible to fit the 7mm Allen wrench down the center of the socket and use a box end wrench to remove the nut from the strut assembly.

ZKTOOL 5PCS Suspension Strut Nut Socket Set 18MM 19MM 21MM

AST6192 5 piece set of handy open sided sockets which can be used with a hex key or spanner to counter hold the strut piston.

AST6191 Hub Clamp Spreader Set will efficiently release the strut leg by opening the clamp for easy removal / replacement without risking damage to the hub casting. The shaft from the shock has a 7mm hex hole so that you can use an Allen wrench to keep the shaft from spinning when you tighten or loosen the nut.

Steeda Strut Nut Socket - 17mm, 18mm, 19mm, 21mm and 22mm

After looking at the professional strut socket I decided to widen the access hole for the Allen wrench. Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut. However, when it comes time to reassemble the strut and torque down the nut, you really need to snap the torque wrench into the end of the socket precluding the use of the Allen wrench. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.com/test-scan-and-specialty-tools/parts-puller-installer/p/oemtools-shock-retaining-nut-strut-removal-socket-tool/300125_0_0" on this server. To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench.