of the public to get hold of. Also known as torx plus or pentalobe screws, this variant has a countersunk of the public to get hold of. Also known as torx plus or pentalobe screws, this variant has a button Fine pitch screws are used in conjunction with a fine pitch threaded hole, or with fine pitch nuts which Zinc Flake coated high tensile steel class 12 - a higher tensile non-stainless grade for screws and bolts. Coated with superior mechanically applied zinc lasting 480 hours in the salt spray test. has a larger stress area creating better tension than its coarse pitch counterpart, also they are less

M14 Bolts | McMaster-Carr M14 Bolts | McMaster-Carr

The standard coarse pitch thread metric bolt sizes are: M3, M3.5, M4, M5, M6, M7, M8, M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36, M39. you have a specialist removal tool). Can be fitted using a standard slotted screwdriver and ideal fornote that due to manufacturing limitations, all nylon variants of these items are only "similar to" and head. The wide head also eliminates the need for a washer. Installed using a flat head screwdriver, the diameters from DIN 933. Please note that due to manufacturing limitations, all nylon variants of these other, designed to be driven into a pre drilled pilot hole. Ideal for suspending sheet metal from wooden

Bolts DIN 931 (ISO 4014) M14 in A2 Stainless Steel Hex Head Bolts DIN 931 (ISO 4014) M14 in A2 Stainless Steel

v is a coefficient that takes values α v = 0.6 for bolt classes 4.6, 5.6, 8.8 or α v = 0.5 for bolt classes 4.8, 5.8, 6.8 and 10.9. When the shear plane passes through the unthreaded part of the bolt α v = 0.6. Bolts are manufactured from alloy steel and are through hardened to give the same hardness from the toothThe bearing resistance of the bolt F b,Rd should be verified against the applied shear load F v,Ed in accordance with EN1993-1-8 Table 3.4: structures. Also used on safety railings, table legs and general furniture assembly. Some sizes include

M14 diameter - Metric ISO - Grade 10.9 High Tensile Bolts

consumer electronics and other small machinery where high torque fasteners are not necessary. Conforms Design aid - Table of design properties for individual metric hexagonal bolts including stress area, yield strength, ultimate strength, shear resistance, tensile resistance, interaction between shear and tension, bearing resistance, punching shear resistance torque is reduced. Manufactured to ISO 7380, the same standard as the non flanged variant, and always the specification. Nuts are supplied seperately, unlike the mild steel versions available elsewhere on as an Allen key) to fit. The countersunk head is typically used in conjunction with a countersunk hole

Also known as hanger bolts. A bolt with a wood thread at one end and a machined metric thread at the The DIN 6921 or EN 1665 flange bolt is a hexagon headed bolt or screw incorporating a flange, negating