If you use your tool daily, lubricate it before every use. Oil will coat and protect every component. While using it irregularly, the oil will pop out through the exhaust, which causes the O-ring to become dry. On the other hand, if the operator lubes the tool only at the time of use, it enhances friction and lessens working capacity. Conclusion If you do not adjust the nail depth accordingly, it can cause the nails to get driven either too deeply or too mildly. So, pay attention to the depth of drive adjustment. I will discuss the Hitachi roofing nailer first, as it is probably their most beloved listing to date. Nailer won’t Drive Any Nail Dust, debris, and other materials may damage or clog the nail gun. To prevent damaging or lodging the nail gun, clean every part regularly. After every use, wipe down the tool with a clean rag. Furthermore, if you use this tool daily, remove the air filter and clean it properly once a week. If you face any problem while using the nt65gs finish nailer, follow the following instructions. Push lever not operating smoothly

Hitachi NR90GC2 (Strip Nailer NR90GC2 Spares and Parts for Hitachi NR90GC2 (Strip Nailer

This is the latest version (J8) of the popular NR90GC2 gun - now with Lithium-Ion batteries instead of NiCd.aawp box=”B000H399PC” template=”vertical”] Frequently Asked Question How do you maintain a nail gun? There is a rubber-shaped ring around the cylinder known as an exhaust valve. If it is somehow worn, damaged, or missing, remove and replace it as soon as possible.

Battery for Hitachi NR90GC2 NR90GC2 Nail Gun NR90GC2 7.2V Battery for Hitachi NR90GC2 NR90GC2 Nail Gun NR90GC2

If the battery is attached to the nailer for 12 hours or more, the battery's output will be automatically shut off due to the built in Auto Power OFF feature for the purpose of reducing battery consumption. In this event, the tool will not operate when the trigger is pulled, but this is not a malfunction.In the event of Auto Power OFF, to make the tool usable again, detach and reattach the battery. If the tool still doesn't operate, the battery is likely empty and will need re-charging.