Error code for issue where the electrical signal within the pump body between the control panel and power board has become disconnected. The air pump for the St Moritz inflatable hot tub is brown to match that outer liner rattan pattern. It has the digital control panel on top of it, since this is the distance farthest from the water and therefore the best place for electronics.

Whether you're simmering savoury stews, cooking up soul-warming soups, or preparing tender roasts, our range of slow cookers will make your autumn evenings unforgettable. Discover the perfect slow cooker to elevate your autumn culinary adventures today! Shop Slow Cookers > The tub itself holds more than 1,109 litres, which will weigh about a thousand kilograms. This means you should place it outside, or on a solid floor like a concrete garage or a downstairs stone wet room. It needs to be within 7 metres of a power source and have about a metre of extra space around it in the room, for airflow purposes. Similar to earlier versions, Lay Z Spa has created another durable and sturdy Inflatable Hot Tub by combining Tri-tech material with I-beam structure. Lay Z Spa’s Tri-tech material is one of the most durable and comfortable fabrics available for Inflatable Hot Tubs. It is made up of a polyester mesh with a layer of reinforced PVC on either side.It’s exceptionally heavy when filled so isn’t really suitable for ordinary flooring without reinforcement – although it is suitable for indoor use. The St Moritz comes with 140 airjets, all of which operate when you connect the liners to the pump and activate it. The hot tub is inflated by the air pump, so there’s less manual labour for you! The Air Protector Pad The Bestway brand debuted in the mid-1990s, while the Lay-Z-Spa brand didn’t debut until the early 2000s. Since then, they’ve been in charge of thoroughly investigating all of the new technology that has resulted. One of their aircraft is the airjet. Another feature is the rapid heating mechanism, as well as the typical inner and outer liner combination that allows their product to circulate air throughout the tub.

Once this has been completed, switch the water flow from in through the C and out again through the B. In this section, we have tried to answer some of the most commonly asked questions we get about this model of Lay-Z-Spa hot tub. Have a read through and, if you still need help, feel free to get in touch. Q) Do I have to turn the bubbles off to turn the heat on in my inflatable hot tub?

We specialise in hot tubs, mostly of the inflatable kind, but from time to time you might find a variety of information about anything swimming, aqua or relaxation related. Recent Posts

Press the thermal reset button for 10 seconds using a pencil or screwdriver (see Owner’s Manual for location) Use the arrow keys on the control panel to adjust the spa temperature. The pump display will show current temperature of the water in your spa and not the set temperature. Filters should be cleaned after every use using water to remove any small particles of debris. If the filters are used for too long they will change colour and deteriorate, meaning the health of the water is not being maintained effectively. Dirty filters can also cause E02 errors to appear on the pump. If you are unable clean the filters these should be replaced.

Unfortunately, like with all Inflatable Hot Tubs, you cannot leave your pump unit outside in temperatures below 4oC when it is not heating, since the water inside the pump may freeze, expand, and cause damage to the internal parts. It is not waterproof – simply splash-proof, like the other Lay Z Spa pumps – so you’ll have to keep it covered in strong rain. Rapid dual operate heating and airjet massage system: Heats Up to a blissful 40 degree Celsius (104 degree Fahrenheit) The Lay Z Spa St Moritz boasts the most Airjets of any of its competitors in the Lay Z Spa Hot Tub line, with 140. The Airjets assist relax your joints by releasing pressure from them, as well as drop your blood pressure, giving your body a pleasant sense.

Some consumers reported using their St Moritz for more than four years and counting. What customers didn’t like about the St Moritz? The lay-z-spa brand are actually a subsidiary of the much larger Bestway corporation. The Bestway brand caters to leisure activities and outdoor equipment, with Lay-Z-Spa focusing on the inflatable hot tub range. There are four separate branches of Bestway, so Lay-z-Spa is just one arm of a massive machine. As the days grow shorter and darkness descends earlier, explore a stunning selection of LED garden lights & solar-powered lanterns, designed to enhance the beauty of your garden even after sunset. Shop Outdoor Lighting > The St Moritz inflatable hot tub comes with an air protector pad that you can use to place your hot tub on top of. This gives it extra protection against the earth underneath, allowing for greater durability to your hot tub. It makes the ground beneath you fell better cushioned, too. Instructional DVDDo not use the spa or place any further Pure Spa Salt for 24 to 48 hours to ensure the levels reduce. Unplug the spa pump, remove from the liner and drain 20% of the water from the spa. Refill this with fresh water. With 140 airjets for just over a thousand litres of water, that’s more than enough to make each person feel fully massaged, even if the tub is full. These are the newer airjets, too. Lay-z-spa recently redesigned them to disperse bubbles more evenly. If you want an in-home spa that doesn’t cost a bomb or take days to fit, then this one has everything you need. Safety Considerations We mentioned above that the outer liner has a wooden weave effect known as a rattan pattern. This allows for an elegant finish that blends with almost all surroundings. The outer liner is that touch TriTech, 3 ply fabric that is actually a patent of Lay-Z-Spa. The inner liner is also made of this material but it is more cushioned for a comfortable inner tub. Once all the vinyl parts are laid out flat, you can connect the air pump and ensure that it is tuned to set up/air only. Plug it in, switch it on, and within ten minutes it will be fully inflated. At this point, you can start filling your hot tub with water. Do this by running a hose into the tub for best results. There is no point using hot water because it will cool by the time the tub is filled. As soon as the tub is more than 80% filled, you can turn on the heat. If you wanted to help it along, adding hot water at this point might work. Buyer’s Guide to the St Moritz Hot Tub from Lay-Z-Spa Place the stoppers caps inside the spa and disconnect the pump unit. Allow time for the pump unit to cool down before connecting again.