in 300 mL, 500 mL wide mouth, and 800 mL capacities. All models are supplied with silicone rubber o-rings and No.8B silicone stopper. The No.8B stopper mounts in a standard 1 L side-arm flask or standard cup manifold. Funnels with covers can be vented aseptically using a hydrophobic syringe… snap caps, side graduations, and frosted writing surface ATP, RNase/DNase and Endotoxin Free (non-pyrogenic) Polypropylene USP Class VI resin High centrifuging to 20,000 x G Freezable to -80C Autoclavable Capacity: 2.0 mL 500 per resealable bag, 10 bags per case Made in USA General-purpose syringes comprise a barrel, a plunger, and a terminal fitting for needles or other attachments. Two-part syringes have an integral barrel and terminal fitting, with a separate plunger. Three-part syringes have a plunger fitted with a separate rubber piston at the end. Plastic general-purpose syringes are made from polypropylene or polyethylene and are often single-use and disposable. Syringes with glass barrels frequently have metal plungers and terminal fittings, so tend to offer better overall chemical resistance and durability. Microliter syringes feature an individually fitted, stainless-steel plunger creating a liquid-tight seal and nearly frictionless movement to accurately dispense liquids from 0.05 µL to 500 µL. Gastight syringes feature a precision-machined PTFE plunger tip creating a leak-free seal to dispense both liquids and gases from 1 µL to 2 L.

error, while meeting patient needs for all ages. 3 mL Amber Syringe with Tip Cap Syringes feature easy-to-read scale markings for accuracy Amber syringes meet USP requirements for photo-sensitive medications 500 per case *Intended use for general purpose fluid… Clear oral syringes are designed to reduce the risk of medication dosing or administrative error, while meeting patient needs for all ages. 10 mL Syringe with Tip Cap Syringes feature easy-to-read scale markings for accuracy 500 per caseMedical syringes are used for drawing up and expelling liquids or suspensions. They are designed to fit appropriate needles, tubing, syringe filters, or similar devices, and are constructed of plastic, glass, or a combination of both. They may also have metal components. Products and replacement parts for use with laboratory syringes; includes syringe caps, tubing, cleaning products, and replacement parts such as needles, barrels, and plungers. Syringe, 1M silicone feed tube, sinker, PVC protection sleeve, aspiration, vent and dosing cannulas, set of spares for valve, operating instructions. For over 60 years Hamilton has been committed to supporting academic research and innovation with syringe grants and special discounts. Help your grant money stretch further. What is a Hamilton Syringe Product Grant? General-purpose syringes are used in many laboratories and other workplaces for drawing up and expelling liquids or suspensions. They are designed to fit appropriate needles, tubing, syringe filters, or similar devices, and are constructed of plastic, glass, or a combination of both. They may also have metal components.

yields vary according to plasmid copy number, E. coli strain, and growth conditions. 50-200 mL of bacterial cultures in LB medium typically produces 0.6-1.2 mg of high copy number plasmid DNA. Up to 500 mL of culture may be processed when working with low copy number plasmid. The system uses… bold, clear scale markings make easy and accurate dosage measurements. The thinner and smaller syringe size is easier to control and is less threatening to patients. 1/2 mL BD™ Tuberculin syringe 27 G x 1/2 in. BD PrecisionGlide™ permanently attached needle (100/sp, 500/ca)also accepts syringe filters. Tubing adapter can be stuffed with cotton for sterile venting; accepts 1/4” to 5/16” (6 to 8 mm) i.d. vacuum tubing. 4618N60 funnel and receiver volumes are 250 mL. Dimensions: 180 mm H x 110 mm o.d. 4618N70 funnel and receiver volumes are 500 mL.… The Syringe and Needle Reference Guide provides detailed information on Hamilton Company’s full portfolio of syringes and needles. Everything from cleaning and preventative maintenance to individual part numbers are available for review. It also includes selection charts to help you choose between syringe terminations like cemented needles and luer tips.

Hamilton syringes are available in two forms, Gastight and Microliter™, differing mainly in the plunger design. These chemically inert syringes feature a syringe body made of stainless steel, borosilicate type I glass, or PTFE. Gastight syringes with a precise, PTFE plunger tip ensure a leak-free seal for both liquid and gaseous samples. Microliter™ syringes with a stainless-steel plunger are hand-fitted to suitable glass barrel, creating a tight seal between them. These syringes are used for homogenous liquid samples that do not precipitate or bond with the glass. SGE Syringe Products General-purpose syringes comprise a barrel, a plunger, and a terminal fitting for needles or other attachments. Two-part syringes have an integral barrel and terminal fitting, with a separate plunger. Three-part syringes have a plunger fitted with a separate rubber piston at the end. Plastic medical syringes are made from polypropylene or polyethylene and are often single-use and disposable. Syringes with glass barrels frequently have metal plungers and terminal fittings, so tend to offer better overall chemical resistance and durability. SGE syringes are available for the GC and HPLC autosamplers, and GC and LC manual injection. SGE syringe options featuring plunger protection, guided plunger, and SuperfleX ® Plunger helps preventing bending or kinking of the plunger. To differentiate among multiple syringe volumes, SGE has introduced color-coding to their chromatographic syringes for easy volume identification. Plunger-in-needle syringes are well-known for complete sample displacement with no carryover. VICI (Valco) Syringe Product The Hamilton Super Syringe is a large-volume Gastight syringe. These syringes are ideal for dispensing volumes from 50 mL up to 2 L. Super Syringes are the only Hamilton syringes that are made with an acrylic barrel instead of glass.Syringes are precision instruments and need care. Learn to correctly inspect, use, unclog, handle, clean and store them to ensure good accuracy, reproducibility, and lifetime. Syringe, 1M silicone feed tube, sinker, PVC protection sleeve, aspiration and vent cannulas, set of spares for valve, operating instructions. The Cleaning Concentrate in a 500 mL bottle offers an effective solution for maintaining instrument cleanliness and performance. It helps ensure accurate and reliable results by facilitating proper maintenance routines. Products and replacement parts for use with medical syringes; includes syringe caps, tubing, cleaning products, and replacement parts such as needles, barrels, and plungers. The Hamilton Super Syringe is a large-volume Gastight syringe. These syringes are ideal for dispensing volumes from 50 mL up to 2 L. Super Syringes are the only Hamilton syringes that are made with an acrylic barrel instead of glass. Found in these product categories: