The push-to-talk button is another decent feature that lets you speak into the monitor and have the voice come on at the camera end where the baby can hear you. Please ensure the Parent unit is plugged in and fully charged - the charging/battery light on the bottom left of the unit should be lit up blue Although the models look similar in appearance, they are not compatible and will not link together. Can I switch off or dim the amber light on the Baby unit? Electrical equipment or large metal items located near the Baby and Parent units, such as TVs, PCs, modems/routers, microwaves. These should be placed at least one metre away from the units to avoid interference Drill holes to the same depth as the wall plugs and insert suitable wall plugs for the type of wall. Screw in the screws through the base of your camera

The Parent unit may be out of range of the baby unit; if this is the case, the parent unit will beep to let you know. In this scenario, please move the units closer to one another, but keep them at least one metre apart to avoid interference The rear features a USB-C port for charging, which is ideal if you already have a phone charger, or another device with that cable. You can even charge the unit in the car. If your camera is paired, the image from the camera should be displayed on screen. The camera icon should appear on the top left or right of the screen. The range is the maximum distance the Baby unit and the Parent unit can have between them and still work together. BT Video Baby Monitors are tested to ensure they have a range of up to 50 metres indoors and 250 metres outdoors. The BT 3000 Video Baby Monitor is a high-quality baby monitor that will help to give you that added peace of mind that your little one is resting or sleeping peacefully. It comes fully complete with a parent unit, a baby unit, two mains power adaptors and a user guide to walk you through the set-up process in a breeze.Move the Parent unit closer to the Baby unit (large metal objects or other electrical devices may affect the signal between the two units)

If the camera image is not displaying, try switching both Baby and Parent units off and trying again. The BT 3000 Video Baby Monitor is a high-quality baby monitor that will help to give you that added peace of mind that your little one is resting or sleeping peacefully. It comes fully complete with a parent unit, a baby unit, two mains power adaptors and a user guide to walk you through the set-up process in a breeze. There’s a selection of five lullabies that can be played to the baby – a nice idea, but they’re pretty flat-sounding so might not be much use for relaxing.The wireless connectivity between the camera and the monitor is super-impressive, working at the other end of the house across two floors and through lots of walls. BT says it can work up to 250 metres. It will even work in the garden, if you don’t go too far. Large metal objects and other electrical devices can impact the signal. Try relocating any object that could be causing interference These ranges can only be achieved in ideal conditions when there is a clear line of sight between the Baby and Parent unit. Any obstruction between the units will reduce the range significantly. The Parent unit may need to be restarted. Press and hold the Power button until red bar appears on screen You can clean the camera using a soft dry cloth or a microfiber cloth for the lens. Don't use abrasive or chemical liquids.