Laser 5493 Brake Disc Measurement GaugeBrake disc measurement anvils for vernier caliper for use with wheels in situ De gesegmenteerde stalen montagestang kan worden gebogen in de gewenste positie en vervolgens vergrendeld. A 3 piece kit designed specifically to allow a DTi gauge to be mounted securely in almost any position against the brake disc to measure disc warp. This model uses a clamping system for universal application. On late model vehicles, the clamp points are not necessarily ferrous metal, meaning that traditional magnetic clamping fixtures are no longer suitable.

Brake disc measurement tool, that fits easily on most vernier calipers (not supplied). No need to remove the wheels or strip the brake first. A reduced tread increases vehicle instability, makes the tire vulnerable to damage and can cause the driver to lose control in the rain due to aquaplaning. Time saver – ensures more accurate quoting without needing to remove the wheels or strip the brakes first A three-piece kit (part number 6084) designed specifically to allow a DTi gauge (Dial Test indicator) to be mounted securely in position against the brake disc to measure disc warp. An innovative design that allows the DTi gauge to be rigidly mounted in almost any position. To further enhance the durability and performance of our discs we introduced our special edition protective coating. This has the additional benefits of:Ideaal voor het meten van de uitloop op bijna elk roterend onderdeel van auto's, waaronder uitloop van remschijven, uitloop en speling van aandrijfflenzen, uitloop en speling van differentiële aandrijfflenzen, uitloop van de schroefas, uitloop van het vliegwiel, speling van de krukas, krukas- en lagerovaliteit en uitloop en ovaliteit van draaibanken. Cet outil est idéal pour contrôler l'usure sur de nombreux composants rotatifs tels que les disques de frein, bride d'entraînement et jeu axial, volant moteur, le jeu sur le vilebrequin, l'ovalité des roulements Einfache Feststellzange gestattet die Befestigung des Werkzeugs an Aufhängung oder anderen Komponenten

Colour coded green | yellow | red traffic-light symbol as to whether you need to replace the brake pads. Een driedelige set, speciaal ontwikkeld om een DTi-meter veilig op bijna elke positie tegen de remschijf te bevestigen om de slijtage van de remschijf te meten. use in conjunction with the LASER EXAMINER 2. The mechanic can complete an objective test of the “wheel system” rapidly, thanks to the simple and intuitive graphic interface.This Brake Disc Digital caliper gauge measures in metric or imperial (0-150mm or 0-6inch) giving readings on a LCD digital display. A Data Hold function makes the tool ideal for use by the garage service mechanics to clearly show the readings to the customer when suggesting their brake discs need replacing. Makkelijk aanpasbaar en vast te zetten. Dankzij de griptang kan de meter bijna overal op vastgezet worden. Time saver ? ensures more accurate quoting without needing to remove the wheels or strip the brakes first Laser Brake Disc Measurement Gauge – 5493 are vehicle brake disc measurement anvils for vernier caliper Produced in high quality stainless steel and supplied complete with batteries and sturdy storage case.

Ideal for measurement of run-out on almost any rotating component including brake disc run-out, drive flange run-out and end float, differential drive flange run-out and end float, propeller shaft run-out, flywheel run-out, crankshaft end float, crankshaft and bearing ovality and Lathe/turning machine run-out and ovality. MTEC stainless steel brake hose kits are available to suit all models of car. Kits feature the finest quality hose consisting of a PTFE inner with a stainless steel outer braid.Kit de 3 pièces conçu spécialement pour installer solidement un comparateur dans presque n'importe quelle position contre le disque de frein afin d'en mesurer le voile. Ideal zur Messung des Plan- und Rundlaufs nahezu aller rotierenden Komponenten einschließlich Planlauf der Bremsscheibe, Rundlauf des Antriebsflanschs und Axialspiel, Rundlauf des Mitnehmerflanschs, Abtrieb und Axialspiel, Planlauf der Schwungscheibe, Axi This Brake Disc Digital caliper gauge measures in metric and imperial (0-6inch or 0-150mm). Data Hold function, LCD reading on a 12mm display and two batteries are included. This tool is ideal for use by mechanics to show the customer clearly when their brake discs need replacing. Supplied with 2 batteries and in a plastic storage case.