Fine adjustments can be made by rotating the hinge plate; this ensures that the fixing bolts can be adjusted so both will go into their respective holes in the toilet bowl Although most seats and fittings are adjustable so that they will fit the most common toilet bowl shapes, you still need to ensure it’s the right size. This bar has 2 blind holes and the method is to locate the spigots into the blind holes which also incorporate a tiny grub screw with an Allen head. A tiny Allen key is required to secure the grub screws to the spigot. Toilet seat fixings tend to be slightly different between manufacturers and due to this there are quite a few, however despite this they can all be broken into 2 different types; bottom fixing and top fixing. Bottom Fixing Toilet Seats

When working with toilets, health and safety must come first! The toilet is obviously a place that can harbour harmful germs and is a source of potential infection therefore precautions should be taken before starting the job. The most common shapes of toilet seat – from left to right, round nose, traditional pointed nose, D-shaped and square Once finished you should also clean any and all tools that you have used. Tools Needed to Change a Toilet Seat For the purposes of this guide we are going to run through fitting a seat using bottom fixing bolts. Step 1 – Fit Studs to Hinge PlateOnce the nuts holding the seat in place are removed you can simply lift it away and free from the pan. What “wrap over” actually means is that the lid of the seat wraps over and covers the actual seat all the way down to the top of the pan. This not only gives a more modern and minimal look but also helps to keep things more hygienic.

Fitting a new toilet seat is basically a reversal of the removal process. Make sure that the nuts are secure but not overly tight, as the plastic screws will not take a lot of punishment before they give way and strip the threads or snap.

If your studs and wingnut or nut are plastic then, as we have said, don’t over tighten them as you can easily strip them. As we have mentioned the first job should be to have a clean around and wipe away any dirt and grime to make the working area safer and a bit more pleasant to be in.

Square seats are common in minimalist styled bathrooms. They are modern, generally soft-close and angular, making them great for people who want to add a modern touch to their bathroom. Typically the toilet seat is fixed to the pan by two long screws, one end runs through the base of the hinge and then through the pan using the holes supplied by the manufacturer. A washer and nut are then added and tightened from underneath that then holds the seat in place. Once it’s out of the way you can then thoroughly clean the whole area before refitting your new seat. Fitting a New Toilet Seat The bottom fixing is the traditional way to fix a toilet seat to a toilet and because of this they are the most common. Plastic toilet seats also come in a massive range of styles and designs so there is sure to be an option that suits your particular needs.

When replacing a toilet seat you have to be absolutely sure that you are replacing the old one with one of exactly the same size so that all supports on the base of the ring sit flat on top of the pan Toilet seats are generally made of one of 2 different materials: wood or plastic. Depending on the style and longevity you are going for will depend on what type of seat material is best suited to your needs. Wooden Toilet Seats One type of plastic toilet seat that deserves a special mention is the resin seat. This is due to the fact that they differ slightly in that resin is slightly tougher and harder wearing than standard plastic and, apart from a massive range of different colours and styles, they can also have images and objects inset into them. It is quite fiddly as grub screws face the cistern and therefore one cannot see these grub screws once the seat is in position. Slow Automatic Closure Toilet Seats