Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. so anyone with the locking nuts from 2001 to 2005 get them off whilst you still can and replace them with the current new type available from Volvo . As a precautionary measure I've ditched the locking ones, the lubricated all 20 with a bit of copper grease before torquing to 110NM.

Let's face it, there was a time when alloys were a luxury - now they're fitted to just about every car on the road, and available by the thousand at your local scrappy for peanuts. My nuts :animal-smiley-037: are old and been on and off many times - or rather the bolts holding the wheels on my car are old and have been on and off lots of times! The handbook and Haynes for my 1997 V70 says 110NM, and my torque wrench only has settings up to 130NM! If anybody could suggest any other easy, and cheap, method to remove this bolt, I'd be very grateful. Actually, I'm that hacked off with not being able to remove my offside front wheel, do any of you know of any garage within 50miles of Darlington that uses Dynomec tools?Whether you’re working on a car or SUV, the kit is designed to remove virtually all locknuts currently on the market. If anyone has this type without the washer it is advisable to get them off whilst you can and replace by the current type. Don't know about the AA, but the RAC will attend to seized wheel nuts, but only if you've got a puncture and are stuck. As such there is a lot of contact surface between the inside of the key and the sides/face of the slip ring as well as the cloverleaf itself so there was a reasonable chance of success.

The Dynomec Locking Wheel Nut Remover tool is manufactured in house by ourselves, made from high quality British steel, we have been leading the industry for over 25 Years.gradualy increase the size of the hole with the drills available , the drills will just last long enough to do the 4 bolts . Machine Mart do a couple of different sets of remover, one of which successfully removed the aftermarket StopLock nuts on my V70.