N.B. A mains adaptor of at least 1.0A at 10-18VDC is required. We recommend Proxxon power supplies NG2/E or NG5/E. Abrasive brushes : perfect for detailed jobs like grooves. Remove the surface layer without damaging what’s underneath. I have the Proxxon tool and I use it a lot. I also "customised" some heads to get into odd or tight spaces. It is ideal for sanding filler-filled ejection pin marks in tight spaces. In addition to 7 standard polishing heads, the 2.35mm and 3.0mm collets make applying diamond burs or other polishing heads possible. Four-jaw design allows for different positioning options. The PS 13 Pensander from Proxxon is a great tool for the model maker and miniaturist. It is ideal for working on surfaces in recesses, slots and other awkward to get at areas. The durable special DC motor is housed in a glass fibre reinforced polyamide casing and the unit features a sanding stroke with a linear action, not rotational. Supplied with four sanding arbors with straight shanks and four angled (all different shapes) as well as three sheets of pre-profiled self adhesive sanding pads. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet.

PROXXON - PS 13

A couple of points I want to mention. If there are any further American (Latin and Canada) interests I would need to know the specific wall plug in. Brazil, Argentina etc. I know they are different. Canada would be similar to the US standard I’m assuming. Please let me know. Could see the advantage especially for those doing lots of resin models. Whilst certainly squarely in the "not essential" category, it could prove useful for those with arthritis or similar conditions that make sanding painful. When you don’t want to do a lot of re-scribing this little sander does the job where needed. I also have a small dish of water handy where I dip the plastic tip of the -400 into when doing a little wet sanding for the tight areas. I’m sure this isn’t recommend but it works brilliantly.with a little wet sanding in areas.

The DAVID 400, the first linear stroke sander in DAVID series, gives a complete solution to your craft and hobby activities. Ideal for working on surfaces in slots, recesses and narrow space, makes all the works you're used to more convenient. With variable speed, the DAVID 400 can be applied to any situation with perfect speed. The DAVID 400 also lets you work with your creativity in fun, various ways like polishing, cutting, or even engraving.

Dremel Sanding for beginners | Dremel

Linear (not rotating) stroke. Long-lasting special DC motor. Housing of glass-fibre reinforced POLYAMIDE. Four sanding arbors with straight shanks and four angled (all different shapes) as well as three sheets of pre-profiled self-adhesive sanding pads are included. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet.Sanding bands : best for flat surfaces and edges. Coarser grit removes more material. Great for roughly shaping wood. For operation a mains adapter of at least 1.0A is required. We recommend MICROMOT mains adapters NG2/S, NG2/E or NG5/E. Sanding discs : less coarse than bands and flap wheels. Suited to light shaping and removing chips.