Brushless Motor – powered by two 18V Li-ion batteries providing 36V of power and runtime without leaving the 18V platform Reverse Switch � tangled grass clippings can be removed by slow reverse rotation of the cutting tool (automatically stops after three seconds) by pressing button and pulling trigger The Makita DUR368AZ Brush Cutter has an offset bike type handle and is powered by two 18v Li-ion LXT slide-type batteries (not included) to supply energy to the 36V brushless motor, with soft start for smooth start-ups and constant speed control to minimise the reduction in rotation speed when under load to deliver up to 6,500 rpm and 550 watts maximum output. This Makita DUR368AZ is supplied body only and requires 2x 18 volt LXT lithium-ion batteries to operate (sold separately). Comes supplied with a nylon wire head, 2x hex wrenches, accessory bag and shoulder strap. Features a "U-Handle" design as standard. The Makita DUR368A has been designed to suit the needs of commercial end users looking for a high powered, quiet and easy to use alternative to a petrol alternative, without the compromise on power. It features a steel drive shaft for less vibration and longer life.

Vario switch with preselection for three maximum speeds allows even quieter operation and provides more autonomy for lighter mowing tasks Performance - The Makita DUR368AZ Brush Cutter is a well designed tool with a wide 35cm cutting width and a durable nylon cutting head which cuts through grass and brush with ease. It has a lightweight design and is well balanced for ease of use. Automatic Torque Drive – will automatically increase the torque of the motor when increased load is detected

Support

U-Handle Design � designed so that the centre line of the handle bars stays aligned with the users centre of gravity Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system. Cordless - The cutter is cordless and allows you to use it anywhere without a power cable tugging against it. Its durable brushless motor is powered by twin 18V (36V) lithium-ion LXT batteries. It can be turned on or off with a simple power switch. Note that the batteries and charger are sold separately.

XPT � extreme protection technology, is an advanced series of seals and channels to direct dust and moisture away from critical components Automatic Torque Drive Technology: Automatically changes the cutting speed according to load condition for optimum operation. Speed Control - The cutter's speed can be adjusted to three different settings - Low, Medium and High. Stage Speed Control � high, medium and low speed, can be changed by simply pushing a button on the easy to use LED display U-Handle Design – designed so that the centre line of the handle bars stays aligned with the users centre of gravity

Makita DUR368LZ Twin 18v LXT Brushless Loop Handle Line Trimmer Body Only

Brushless Motor � powered by two 18V Li-ion batteries providing 36V of power and runtime without leaving the 18V platform

Reverse Switch – tangled grass clippings can be removed by slow reverse rotation of the cutting tool (automatically stops after three seconds) by pressing button and pulling trigger Automatic Torque Drive Technology: Automatically changes the cutting speed according to load condition for optimum operation Powered by two 18v Li-ion batteries in series to supply energy to the powerful 36v DC motor drive systemStage Speed Control – high, medium and low speed, can be changed by simply pushing a button on the easy to use LED display Automatic Torque Drive � will automatically increase the torque of the motor when increased load is detected

This brush cutter has 3 speed settings; high, medium, low and a also a reverse switch which is ideal for the removal of grass clippings. The variable speed control dial allows you to adjust the speed and the power switch has an automatic off function to save battery charge for longer run times. The Makita DUR368AZ is a great alternative to petrol brush cutters for the trade or private user! This brushless machine is high powered, quiet and easy to use, no messing with petrol and doesn't compromise on power. It features a steel drive shaft for less vibration and longer life.This Makita DUR368AZ is supplied body only and requires 2x 18 volt LXT lithium-ion batteries to operate (sold separately). DUR368AZ Features:Maintenance-free carbon brushless motor with electronic control ensures a high motor efficiency and significantly less heating Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system