To prevent damp from seeping through then you can use a high quality anti damp paint that creates a barrier that prevents moisture from penetrating and spreading within your home. Allow up to 4 hours for the damp seal paint to be touch dry and ensure there’s plenty of ventilation when you apply the paint as it can produce quite a strong odour that does dissipate with time. With the Thompsons paint you can expect around 5m2/L paint coverage making it ideal for small problematic areas. You should apply the Thompsons damp seal with a brush for the best results and ensure that the damp problem area has been prepared before applying.

Look out for discoloured or stained areas forming – particular hot spots include chimney breasts and the corners of the room. Windows You can expect a matt white finish from this paint and can be used as an undercoat to apply your final coat of chosen paint. It is suitable to apply wallpaper over the paint once it’s fully dry. The Polycell one coat damp seal spray paint can be used as an undercoat when dried to apply your final paint finish or wallpaper over.You can apply anti damp or damp seal paint to most interior walls and surfaces and it’s suitable for most rooms. If applying multiple coats then allow the surface the dry, so allow atleast 8 hours before you go ahead and add another coat of the damp seal. A solvent based paint that can be used to seal patches of damp with just one coat – it prevents damp from penetrating and showing through walls and ceilings and works to stop damp from showing any signs on the surface eliminating stains and streaks that can often occur. After the paint has been applied and dry then you are free to paint over or wall paper over the area in your desired finish. Rising damp is more than just a touch of mildew or mould, it’s indicative of an underlying condition that will reoccur unless moisture is prevented from rising and entering the walls.

The Polar damp seal can be used as a finished surface paint or can be applied and dired out for antidamp protection before you apply an overcoat paint or wallpaper to the room. Damp seal spray paint is hard to control and can result in a wide area of paint residue landing on other furnishings within an area so be prepared before you start spraying. If you are using one of our chosen 5 best damp seal paints, you don’t need to worry about sealing your damp before painting.

The Thompsons Newsletter

The Polar Damp Seal One Coat Paint is a multi-purpose damp seal that’s especially forumlated to provide protection to interior walls that are prone to damp spread. Damp seal paint or also known as anti damp paint is used on walls and surfaces that have been affected by the build up of moisture. The build up of moisture can cause the damp to spread through interior walls leaving water stains and streaks to can be unappealing to the eye. Available in multiple sizes, 250ml, 500ml and 2.5L tins to suit all scenarios inaddition to the Ronseal One Coat Anti Damp spray.

We suggest you consider what each paint has to offer. Thompson TDS25L Damp Seal comes in a large tub, can be applied straight to dry or damp ceilings and walls and provides great one-coat coverage. Similarly, Polycell damp seal paint can also be used straight from the tin. Sometimes you will see crumbling paint or wallpaper hanging or bubbling this effect on walls and ceilings can be a sign that there is a damp problem in your home. Damp proof paint should not be used to mask a problem, it should be used as a preventative measure to decrease the risk of reoccurrence. If you’re keen on fixing a damp problem and preventing a reoccurrence of unpleasant mould damp seal paint could be the answer. The manufacturers of each of the five products we have listed above claim that their particular brand can help your fight against damp. This can vary from brand to brand. Some can dry in as little as 2-3 hours and be ready to paint or paper over in approximately 4 hours. The one coat paint should do as it says on the tin (one coat should be enough), but in certain cases you might prefer to apply an additional coat. How Do You Seal Damp Before Painting?This damp seal spray paint can be applied easily by placing the nozzle close to the affected damp area and spraying evenly to provide protection from damp, mould and mildew forming. Did you know that you can also get the Polycell One Coat Damp Seal paint in a spray paint aerosol container? Well you can. You can of course then paint over the damp seal with a normal paint of your choosing but it’s not necessary unless you would like a different colour to white (which is the colour most damp seals come in). Will PVA seal a damp wall?