Using paper shredder oil sheets that come coated in grinding powder will also help to sharpen the blades of your shredder, which you cannot do manually. Q: What kind of oil do you use for a paper shredder?

The advantage of shredder lubricant sheets over regular shredder oil is that it is more convenient to use. You don’t have the hassle of using a bottle with a liquid oil that you need to pour inside the feed opening of your shredder. Just grab a lubrication sheet and shred it, that’s all you need to do. No more drips and spills. What are shredder bags?A: Sewing machines need to be oiled just like shredders do, but the products are not necessarily the same. With both sewing machines and shredders, the oils used mustn't be petroleum-based. However, even though some sewing machine oils are quite similar to shredder oils, chemical makeup can vary significantly. The manufacturer will have guidelines about the kinds of products that you should use and note that using a non-specific oil may void your warranty. Conclusion You can put some documents through the shredder afterwards to clean away excess oil. Don’t cover your blades in water, as this can cause rust. DIY Oil Sheets The direct method involves pouring the official oil directly into the paper input. For this method, we urge you to use a bottle with a narrow spout to pour the oil in the opening without spilling it. This is how you apply the oil: Turn on the return function or reverse function and let the shredder run for another half a minute so that the blades are well lubricated.

Make sure you keep your document shredder clean from the dust and small pieces of paper. Due to paper shredding, dust collects between the cutting blades. But, how often and when do you need to lubricate your paper shredder with oil or lubricant and sharpening sheets? Let’s find out below. How often should you oil and clean your paper shredder A: The tongs and inner workings of a paper shredder are unique, rendering generic lubricating oil unsuitable and potentially detrimental. Paper shredder oil is engineered to clean and lubricate a shredder's delicate mechanics. Q: Do you need to oil a paper shredder? A: The most common shredder oils include Solvent Refined Hydrotreated Middle Distillate, Commercial Oleic Acid, Butylated Hydroxy Toluene, Severely Hydrotreated Light Naphthenic Distillate, Canola oil, and some vegetable oil derivatives. You must never use commercial lubricants, like WD40, on a shredder because this can do a lot of damage.

The 3 ways of oiling a shredder

Keep in mind that micro-cut shredders require maintenance more often than cross-cut and strip-cut shredders. What are lubricant sheets? There are many kinds of canola oil and dedicated shredder oils you can use to keep your device in good condition. However, there are also options that are best to avoid. Even if your cross-cut shredders have been struggling for a while, don’t use WD40 on the device. No, it is not recommended to use WD-40 or other universal lubricants or penetrating oils to lubricate your shredder. Also, vegetable oil or another type of generic oil is not recommended to use as a lubricant for your shredder. If you can’t find dedicated lubricants for your shredder cutting blades, there are alternative oils available. Some people use a bottle of vegetable oil, carefully applied to reduce clogging. Aside from vegetable oil and shredder oil, you could also look into canola oil. The type of shredder that you have makes a difference as well. A micro-cut shredder produces finer particles of paper and has more blades, making it more prone to clogs and therefore requiring more preventative maintenance than a cross-cut shredder.