Roxtec offer a complete sealing solution for use across a huge range of industries both on land and at sea. Their modules are inserted around cables or pipes in frames that are attached to a structure by welding, bolting, casting or core drilled holes for a smart, safe and easy solution. Training and preparation - First, read and follow the manufacturer's instructions. Like any other job a field mechanic performs, it requires knowledge and skill. Duct sealing solutions should be engineered into the job and training completed in advance of the fieldwork. Seals all known materials: PVC & PE sheeted cables, PILC cables, (HD)PE pipes, PE drink water conduits Trusted – WIMES (Waters Industry Mechanical & Electrical Specification) accepted for duct sealing in the water utility sector

Should any un-mixed material spill onto a surface, a solvent wipe can be used to help clean the area. Reentering & removal It is vital, to make sure the duplex foam is wrapped around each cable, to create separation from each other and the inside of the duct. Running water Designed for fireproof ducting of cables in buildings and industrial applications. The system combines flexibility and simplicity with outstanding fire protection. Closed cell foam rubber sheets can be sized to suit any sized cable or pipe passing through any sized opening. Ductwork systems that have a better air tightness, lose less energy than leakier ones. HVAC running costs make up a very substantial part of a building’s operational cost and some of this cost may be recovered by reducing ductwork leakage. Poor performing HVAC systems can lead to poor indoor air quality (IAQ) and a reduced level of comfort in buildings. People can spend as much of 90% of their time in indoor space, and increased comfort and IAQ have proven benefits to productivity and reduced absenteeism.We'll start with some information about polyurethane DIY foam comparing to our MD5 Duct sealing Resin. All CSD products have beenextensively tested, not only atBeele Engineering technical laboratoriesin the Netherlands, but also by independent experts.

Power Cables – specified to seal high voltage and heavy armoured power cables in single, trefoil or Triplex arrangement CSD Sealing Systems have representedBeele Engineering within the UK for over 25 years, providingsolutions that improve safety andensure fire & watertight integrity acrossnaval, marine & offshore sectors. We also provide watertight, gastight, flood & fire protection for onshore construction projects across the utility, nuclear & construction industries.

Complies with 2011 NEC Articles 225.27, 230.8, 300.5(G), 300.7 (A) on Raceway Seals, and 501.15 (B)(2) After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability. Using this approach, inaccessible points of leakage can be sealed. Large sections of ductwork up to 150m can be sealed at a time dependent on design. Large ductwork systems can be sealed by breaking them down in to small sections. Aeroseal helps companies meeting the environmental commitments by reducing power consumption and therefore carbon footprint. MD5’s resin can be installed in temperatures from 5°C (41°F). In colder temperatures, expansion can be slower but will expand and cure over a more extended time. Expansion time between 8-10 minutes at temperature ranging between 15-20°C. Cleaning