If the sensor detects a drop in soil moisture, it sends a command to the base station which in turn opens either one outlet or both depending on how you programmed it. It might be linked to the physical button override on the device to manually open / close the valve. I had to use timers all the time and sometimes I didn’t want that so Bhyve didn’t do the trick in HA like I had hoped.

Instead of spending time walking around your garden with the Best Garden Hose, let technology do all the hard graft by installing an irrigation system, a simple tap timer or even a self-watering planter.

It’s also best to have your pots group fairly closely together or the tubing will look unsightly and possibly be a tripping hazard. Sorry but if there is no "wrong data" why it doesn't detect the right device (it detects as "asc circuit breaker")? If you’re on the hunt for a comprehensive irrigation controller that will keep your garden in tip-top condition while you sit back and relax, then put this one high on your list of contenders. This watering kit is comprised of a mechanical timer that you attach to the nearest outdoor tap, a pressure reducer, 15 metres of 4mm micro tubing, 14 T-shaped connectors and 15 drippers with stakes.

The B-Hyve is ultimately geared towards reducing water consumption without impacting on the health of the garden. It also comes with a visible gauge that tells you when to put more water into the base using the handy built-in funnel and a pair of brackets for mounting it on a balcony railing.When I received this 79cm long plastic rattan-patterned outdoor planter I promptly planted five pansies in it. Thanks for your help, I've fix the file and added support for all the remaining DPs which could be found on Tuya IoT platform for this device. Instead of having to faff about with watering cans, the GardenPump 18 uses cordless technology to pump water from the butt through your hosepipe to a water gun or sprinkler.

Potted plants need regular watering because the small amount of moisture in the pots evaporates extremely quickly on hot days.I suspect you encountered the race condition in HACS where if you press the Install button immediately after selecting a version, it actually installs the version that was previously selected when you opened the dialog. I already have uuid for both devices (Gateway and Valve) and the local key (the same for both) even if I didn't use your method (with TinyTuya) but I did get them from the iot cloud Tuya Platform (API Explorer - see below screenshot). inch LCD Screen ]--Large LCD display accounts for over 60% of the panel to make it more interactive and easy-to-read.

Just mount the battery control unit to a wall or wooden post next to the butt, feed in the supplied suction hose with pump attached and loop the hose guide over the lip of the butt.

This is not only a gross waste of precious water but if you have a water meter fitted, you’ll likely receive a whopping bill from the water supplier for your absent-mindedness.