Networks A mobile (cellular) network is a radio system, which allows a large number of mobile devices to communicate with each other. GSM Step 3: Now you will see a “ Warning” message as shown below. Just press the “ Volume Up” key to continue. System on Chip (SoC) A system on a chip (SoC) includes into a single chip some of the main hardware components of the mobile device. SoC The capacity of a battery shows the maximum charge, which it can store, measured in mili-Ampere hours.

stand-by time is the longest time a battery charge will last, if the device is not used but is constantly connected to the 3G mobile network. Battery The batteries of mobile devices differ in capacity and technology. They provide the electrical charge needed for the functioning of the devices. CapacitySome mobile carriers released branded versions of the Galaxy J3 (2016) with slightly different specifications. Information about the width, i.e. the horizontal side of the device when it is used in its standard orientation. The Samsung Galaxy J3 (2016) (also known as Galaxy J3 V, Galaxy J3 Pro, Galaxy Amp Prime, and Galaxy Express Prime) is an Android smartphone manufactured by Samsung Electronics and was released on May 6, 2016. [1] Specifications [ edit ] Hardware [ edit ]

One of the main characteristics of the display is its type/technology, on which depends its performance. Information about additional software and hardware features of the rear camera which improve its overall performance. A CPU core is the processor unit, which executes software instructions. Presently, besides single-core processors, there are dual-core, quad-core, hexa-core and so on multi-core processors. They increase the performance of the device allowing the execution of multiple instructions in parallel. SM-J330F, J330F, J330G, SM-J330G, SM-J330FN, SM-J3308, SM-J327F, SM-S337TL, SM-J3300, SM-J330L, SM-J327U, SM-J330N Step 8: Don’t do anything during the flashing process. Once it gets completed, you will see the green “ PASS” message as shown in the screenshot below.Step 9: Now unplug your device from the computer. But when you try to boot your device normally, it will get into a boot loop. To fix this error, switch off your smartphone and boot into the “ Recovery” mode by pressing and holding the Volume Up, Power and Home buttons simultaneously.