CO2 leak detectors are employed to monitor storage areas, keg rooms, or any other spaces where carbon dioxide cylinders or systems are installed to prevent leaks and ensure a safe working environment. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . The SCL2 Carbon Dioxide Leak Detector comes with a wall and car charger for its ultra compact lithium ion battery which last for a full eight hours.

Breathing in high levels of carbon dioxide can result in symptoms such as dizziness, shortness of breath, headache, confusion, rapid breathing, increased heart rate, and in extreme cases, loss of consciousness or death. Gas Sample Collection: The detector collects a sample of the surrounding air or gas mixture through an inlet or sampling port.

The sensor detects changes in concentration, not absolute concentration, allowing the SLC2 to differentiate CO2 concentrations higher than concentrations normally found in the ambient air. Innovative large TFT LCD display screen, showing the leakage level in colorful bars, the detector optimizes the user experience and presents the detection results more intuitively and diversely. Note that there are restrictions on some products, and some products cannot be shipped to international destinations. The magnitude of the electrical signal corresponds to the amount of absorbed light and, in turn, indicates the concentration of carbon dioxide in the environment. Used to detect leaking combustion gases that may find their way into the cooling system when a head gasket blows or block cracks.

The lifespan of a CO2 (carbon dioxide) NDIR (Non-Dispersive Infrared) sensor last between 5 to 15 years. Once fitted to the running engine's coolant filler neck the rubber bulb is used to suck the gasses that collect in the top of the filler bottle through the fluid in the tester. Our products identify gas leaks and potential threats with convenient, functional portable gas detectors – making these robust industry-standard devices a must have piece of safety equipment.When CO2 is drawn through the sampling cell by the D-TEK CO2's internal pump, some of the infrared energy is absorbed by the CO2 . Works well, but takes a couple seconds to register the leak, and also doesn't show actual ppm values for easier sleuthing. A CO2 leak detector is a device designed to find CO2 gas leaks along various gas lines and connections. The SAN-13 CO2 Leak Detector is designed to protect employees or workers in areas where CO2 leaks can occur. Most importantly you can check whether the gasket under the head of your car is fully functional without visiting the mechanic.

While most individuals will never experience the hazards of a CO2 leak, several injuries can occur to those working around dangerous CO2 points like beverage systems, cylinders, storage tanks, carbonators, and beer kegs. Use a CO2 Leak Detector: Acquire a CO2 leak detector and use it at suspected leakage locations to pinpoint the increase in CO2 concentration.Don't forget that CO2 is heavier than air, so if you are in a shaft or confined space, take extra precautions. If the gasket under the cylinder head looks damaged, you can check it yourself and save time and money. Used to detect leaking combustion gases/carbon dioxide that may find their way into the cooling system when a head gasket blows or a cylinder block cracks.