In this blog, we will teach you how to use the DJI Motion Controller and enjoy a unique flight experience. Take off:To make the drone take off, all you need to do is press the button on the side of the remote gadget! Connect the USB-C port of the goggles to your mobile device, open the DJI Fly app, and follow the prompts to activate. When the drone is returning to the Home Point, please pay attention to any real-time changes of the Home Point location. For more details about the Motion Controller, read our DJI FPV Combo hands-on review or buy it here.

If your command has worked, the drone lights should no longer flash and you should have heard a satisfying beep! You've just synced! Controlling this UFO drone is super-easy, even if flying drones is alien to you. It uses a controller that senses your hand motions, letting them control the drone. And, so that it stays stable in the sky, it has 6-axis gyro control and ‘headless mode’, which means that any side of the drone can work as the nose, relative to where you are standing (so forward on the remote is always forward for the drone). In 810p/120fps Low-Latency mode, the video transmission latency is lower than 28ms; in 810p/60fps High-Quality mode, the video transmission latency is lower than 40ms. Let’s face it, there haven’t been any properly-recorded UFO crashes in history, so they must be pretty easy to fly. That, or they're full of awesome technology that helps keep them in the air! We’re not sure, because we’ve never asked an alien. But, we can confirm that this Earth-made RED5 Motion Control UFO is both easy to fly and loaded with out-of-this-world tech!

Auto take-off and land: Getting the drone up in the air or getting it to land safely might seem easy, until you try it and then reality hits. Too much or too little power and it can end in disaster. With the Motion Drone it’s a breeze. Simply press the button on the side of the remote and up it goes. Press it again and watch it land without a hitch. Make sure the batteries for the aircraft, goggles, and Motion Controller are all sufficiently charged for flight.

Altitude hold: The Motion Drone has a nifty feature where it automatically holds its height for you. That means you can focus on flying it where you want it to go without the worry of going too high and out of range, or too low and hitting the floor! If you have just replaced your blades, be careful you haven't put your brand spanking new ones on too firmly, as this can stop the motors spinning freely (or even at all). Try raising them slightly up their spindes as this could give more room to rotate. The Motion Control Drone is so incredibly easy to use, that we actually struggled to crash it! So if you are all about the newest technology, then this innovative flyer is a perfect gift from you to you. Or to someone else if you’re feeling especially kind. Feel the thrill of immersive flight provided by the DJI Goggles V2 [1] and DJI FPV’s super-wide 150° FOV. [2]HD video transmission at up to 120fps gives you an ultra-smooth, real-time view of your flight.Blades not spinning? You might not believe this, but one of the most common reasons for a rotor not spinning is trapped hair! If you have a family pet (or just a particularly hairy family member!) you might find that over time hair can become trapped around the motor, which prevents it from spinning. Most blades pop off very easily so it's a super easy problem to fix. Some drones come with little u-wrenches to help pop them off. Headless mode: Headless mode is a great feature, particularly for new pilots, which makes flying even easier. Now you don’t need to worry about which way the drone is facing and trying to figure out the correct command to give it. Simply put, if you want the drone to go to the left, tilt your hand left and that’s the way it will go, regardless of which way the drone is actually facing.Plus, headless mode gives you the opportunity to perform amazing 360° flips with ease. Simply push up the trigger on the side and watch in awe as the drone works its magic. The USB-C port at the bottom of the Motion Controller can be used to charge the device and connect to a computer for firmware updates. FCC-compliant. Measurements were taken in unobstructed environments free of interference. Always follow local rules and regulations and fly your drone within your visual line of sight unless otherwise permitted.