Old Village has reproduced these products, but in the interest of health, concessions have been made to use safe modern raw materials. We have kept the spirit of the Colonial American Craftsman in producing these materials with which to achieve the lovely effects so much a part of their legacy. Clean up and thin, if necessary, with water. Clean rollers, brushes, and other equipment with soapy water and rinse well. These paints are best applied with a good nylon brush. They may also be applied by roller, spray, or foam type applicator. Many other unique decorating effects are possible with these Buttermilk Colours. Use your imagination to imitate wood, stone, distressing, leaves, tile flower petals, etc. Spatter over the ground colour with one or more other colours by dipping the tip of a toothbrush or other stiff brush lightly in paint. Wipe almost dry on paper. Make small dots of paint on ground colour by running a finger over the bristles. Thin paint slightly for larger spatters. Try it first on a piece of paper

Primer & Undercoat. We recommend using the closest colour primer& undercoat to your top coat. For Buttermilk – BS10C31 use white primer and white undercoat. Buttermilk Paint Colours contain water and should not be used at temperatures below 50S- This temperature must be maintained through the whole drying period. Apply two coats of Buttermilk Paint of different colours (ie. 1st coat – red, 2nd coat – blue) Allow each coat to dry thoroughly. Sand with very fine sandpaper (320 wet or dry) until base colour shows through finish in some areas. Edges and high spots should show through more than other places. Clean with tac cloth and glaze if desired. Stenciling, striping, and hand decorating may be applied before the sanding operation.They do not have to be stored in a refrigerator after opening, simply recap and they will last a long time. Wood Finishing And Decorating Paintman Paint take pride in only producing the highest quality, hand-mixed paints. Combining premium tints and resin in our formulas develops a paint with outstanding coverage, build and durability; suitable for the finest of projects. Begin each of these decorative techniques by carefully following the general painting instructions. Spatter Finish Traditional Synthetic Coach Enamel– Maintaining the traditional element of a long wet edge time minimises brush marks whilst maximising its self-levelling ability for a perfectly flat, gloss finish. Our premium formula gives you superb coverage; suitable for the traditional application methods of brushing and rollering. Synthetic Coach Enamel also supports spray application for those who want product originality.

Like all Buttermilk Paints of Colonial America, Old Village Buttermilk Paint Colours may be used on interiors of barns, buildings, walls and trim, and on furniture and artifacts. These colours dry to a beautiful matte finish that does not destroy the texture of the wood. Multiple coats will build a longer lasting and more opaque film By adding water, a transparent stain effect can be attained. The surface to be painted must be clean. All dirt, grease, wax, oil, furniture polish, loose paint, and other foreign material must be removed. Buttermilk finished may be glazed to enhance the colours and add durability, abrasion resistance, build, etc. We recommend Old Village Transparent Satin for ultimate hardness and mar resistance. Special Note For reasons of hygiene and safety, personal grooming products, cosmetics or items of intimate clothing cannot be returned. Surface should be fully cured, dry, level and free from efflorescence as well as loose or friable material including coating, oil, soot, lichens and dust

Pallet agreements which are about to expire

Due to the different resins used, you may experience slight shade variations between Ultraspeed and Coach Enamel. Buttermilk – BS10C31. This is a Traditional classic colour for Vehicles, Canal boats and other classic transport. Type of Paint Buttermilk Paint Reproduction Colors may be used on unpainted or painted walls and ceiling surfaces. They are also highly desirable as a color coat on woodwork, furniture and smaller objects requiring a paint finish.

Spray application. All of our Enamels will need to be diluted by around 5-10% using Paintman Coach Enamel Thinners, thus ensuring the highest quality finish and maintaining correct drying times. Dip stiff bristly brush in contrasting colour thinned with a little water. Wipe almost dry on paper. Brush streaks of one or more colours over ground colour. Try it first on a piece of paper. The various effects enumerated here may also be used in combination – antiquing and spatter, graffito and antiquing, stipple and spatter, dry brush graining and sand-off antiquing, etc. Glazing Our mission is to provide paint that is as close to the original shades as possible. Please be aware, shades may differ depending on viewing device. We are now able to exclusively offer a choice of Enamel to meet your growing requirements: Stir well from the bottom up. This product may be thinned with water. DO NOT USE SOLVENT. Buttermilk Paint Reproduction Colors may be tinted with universal colors, intermixed, or lightened with Buttermilk Shading White. Do not mix with other paints. When more than one container of the same color is to be used, mix them together before starting. Do not apply when temperature is below 50F. Buttermilk Paint Reproduction Colors may be applied by brush, roller, or spray. Apply at a spreading rate of 400 sq. ft. per gallon.Unwanted Food or Drink Products - Once supply conditions are broken, there are a number of factors outside of our control that can affect the quality of a product. Therefore perishable goods such as food and drink cannot be returned. Application: Brush, roller, airless spray,conventional spray. STIR THOROUGHLY BEFORE USE. Seal all new or bare surfaces with a thinned coat of Weathershield Smooth Masonry Paint (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Weathershield Smooth Masonry Paint, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. In normal conditions two coats of Weathershield Smooth Masonry Paint properly applied to the substrate in accordance with the instructions will perform satisfactorily for up to 15 years giving good colour stability (as part of BBA certificate 97/3383). See current colour collateral for choice of colours.