An electrical wall box should be pre-installed with an Ethernet cable running from the box to a UniFi Switch with PoE. Ubiquiti Networks Unifi UAP-AC-IW! อุปกรณ์แอคเซสพอยต์ติดผนังแบบ 2x2 ที่ให้ประสบการณ์การใช้งาน Wi-Fi 802.11ac คุณภาพสูง มอบความสะดวกสบายให้คุณในการใช้งานอินเตอร์เน็ตทุกครั้ง Posted Jan 2020: https://community.ui.com/questions/Announcement-EOL-for-some-UniFi-AP-models/65487283-ce9d-49f4-85b9-b6aa54659ef7 The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.

You may choose to restrict the collection or use of your personal information in the following ways: End of Life (EOL): Device will be visible, but not configurable, in controllers released after the EOL date. It will continue to operate with its current configuration, and the controller will be able to forget the device. The Ubiquiti UAP-AC-IW isa dual-band 802.11AC WiFi Access Point powered from an Ethernet wall connection. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network. The range difference between the U6-Lite/U6-Pro and the U6-LR is large enough that it could be the difference between needing one or two APs to cover an area. In some situations one U6-LR is better, in others two lower-power APs may be better. It is hard to make general conclusions. PoE In + Data 10/100/1000 Ethernet port supports data and 802.3at PoE+ input. The UAP-AC-IW-PRO itself requires 10W.Ubiquiti's UniFi AP AC IW (In-Wall) Access Point transforms an Ethernet wall connection into a dual-band 802.11AC WiFi Access Point. The device features two additional Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network; both ports can be found on the base of the device. Unifi UAP-AC-IW คุณสามารถสั่งซื้อและติดตั้งได้อย่างง่ายดาย อย่าพลาดโอกาสที่จะเพิ่มประสิทธิภาพในการใช้งานอินเตอร์เน็ตไร้สายในพื้นที่ของคุณ Turn existing wiring into per-room Wi-Fi with the UniFi PoE Switch series. (Requires Cat5e or higher) With every foot of free space and every obstruction, a Wi-Fi signal attenuates and gets weaker. 5 GHz signals attenuate faster, and are more affected by obstructions. When deciding on how many access points you need, a good general rule is don’t expect 5 GHz coverage to extend further than 2 walls or 30 feet away.

The Access Point AC In-Wall (UAP AC IW) is a dual-band, 802.11ac WiFi access point that can be plugged into any standard wall outlet. The UAP AC IW can reach a 1.1+ Gbps aggregate throughput rate with its 5 GHz and 2.4 GHz bands, and it has an impressively long transmission range up to 100 meters (328 feet). This access point is also equipped with (3) GbE RJ45 ports, including (1) for PoE input, (1) for 48V PoE output, and (1) dedicated to data transmission. The UAP AC IW is the perfect plug-and-play access point for those looking for an easy-to-use, inconspicuous way to broaden their wireless coverage. It can be set up in minutes and fully managed with the UniFi Network web application or UniFi mobile app. Ubiquiti Networks Unifi UAP-AC-IW วันนี้! เปลี่ยนประสบการณ์การใช้งานอินเตอร์เน็ตของคุณให้ดียิ่งขึ้นด้วยอุปกรณ์ที่คุณคู่ควร!Unifi UAP-AC-IW มาพร้อมกับซอฟต์แวร์ Unifi Network Controller ที่ให้ควบคุมและจัดการเครือข่ายของคุณได้ง่ายขึ้น ตั้งค่าเครือข่าย, ตรวจสอบสถิติการใช้งาน, และปรับปรุงความปลอดภัยของเครือข่ายของคุณ Unifi UAP-AC-IW สร้างมาสำหรับการติดตั้งในผนัง ด้วยการออกแบบที่เหมาะสมกับการใช้งานในที่ต่าง ๆ ไม่ว่าจะเป็นห้องนอน, ห้องประชุม, ห้องพักโรงแรม หรือในสถานที่ทำงาน เปิดโอกาสให้คุณเชื่อมต่อไร้สายได้อย่างสะดวกสบายและมีประสิทธิภาพ IMPORTANT: The UAP-AC-IW-PRO requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended.

IMPORTANT: The UAP-AC-IW requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended. Next, I switched over to my MacBook Pro and it’s 3 spatial stream Wi-Fi 5 radio. This is an interesting test because it shows the impact of an additional spatial stream, and removes the highest-end modulation (1024-QAM) and longer symbol duration of Wi-Fi 6. This is a more even playing field, and a chance for the 3x3 and 4x4 APs to show their strength. I want to reach out and announce that we are starting the EOL lifecycle for the following models of UniFi AP: Devices will lose controller support in a controller version that is released AFTER the EOL date, and it will be clearly announced in release notes. In other words, it should be clear to the user before the upgrade happens, that the upgrade will terminate support. These results show how the AP performs when it’s 5 GHz signal is hovering around -80 dBm RSSI and around 10 SNR. From the same location 2.4 GHz connections are stronger and more stable. Note for International Readers

48V PoE Adapter

Ethernet port supports data and PoE passthrough (requires 802.3at PoE+ input). The maximum PoE passthrough output is 12W. Wi-Fi 802.11ac คุณสามารถเชื่อมต่ออุปกรณ์อิเล็กทรอนิกส์หลาย ๆ ตัวของคุณให้สามารถใช้งานอินเตอร์เน็ตไร้สายได้อย่างรวดเร็วและมีความน่าเชื่อถือ ไม่ว่าจะเป็นสมาร์ทโฟน, แท็บเล็ต, คอมพิวเตอร์โน้ตบุ๊ค หรืออุปกรณ์อื่น ๆ PoE+ input is required to use PoE passthrough. Connect this port to a UniFi Switch with PoE that is connected to your LAN and DHCP server.

Looks like some of their APs are going EoL 1 March 2021, which means that any controller versions later than this will not allow you to configure the equipment. We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen. The U6-Pro has the best 2.4 GHz performance, due to it being the only model tested with Wi-Fi 6 support. 5 GHz performance depends on a lot of factors, but the AC-HD, U6-LR and U6-Pro performed the best overall. I don’t have a reliable way to test multi-client performance yet, but they should also offer the most performance in multi-client tests and realistic use. To specify which AP and which band was being used, I used the settings offered in the UniFi network controller or Instant On portal, and swapped them in and out as needed. I then stepped through the different channel widths and bands, letting the connection stabilize before beginning my tests.Dual band, 802.11ac Wave 1 access point with a 2+ Gbps aggregate throughput rate that can be plugged into a standard wall outlet.