Before use, ensure the air temperature is above 18°C, the floor temperature is above 15°C (with under floor heating max 20°C) and the relative humidity is less than 70%. If necessary, bring the adhesive to the right temperature.

The surface should also be slightly textured. If applicable, it must meet the requirements of local standards or codes of practice. If necessary it should be professionally prepared for laying. A primer is typically not needed. If the sub floor is problematic the use of a primer like Bona D501 Mosaic parquet or any other similar solid parquet: approximately 900 g/m², Bona Trowel 850 G or 850 F Particularly suitable for the installation of parquet with low movement (such as engineered parquet and mosaic parquet flooring), Bona R848 adhesive 15kg is a one-component product that’s safe to work with and easy to handle. One of the main advantages of Bona R848 adhesive is its high bond strength. They designed this to provide a durable, strong bond that can take heavy foot traffic and other types of wear and tear. This adhesive also has a long working time, allowing for easier flooring installation and adjustment. Easy to clean properties which mean it won’t harm the finish on hardwood floors and pre-finished trim.layered pre-finished parquet, boards and solid wood planks (max. 22 x 120 mm): approximately 1350 g/m², Bona Trowel 1250 F or 1250 G

According to ISO 17178, Bona R848 is an elastic 1-component silane-based adhesive for dimensional stable multilayered, engineered parquet. Tensions to the sub floor are reduced. The use of a primer is in general not necessary. The adhesive hardens by a chemical reaction with moisture. Pallmann P4 adhesive is a one-component, water-based adhesive. They designed this product specifically for wood flooring installation. This adhesive is ideal for engineered solid wood floors; you can use it on concrete and wood subfloors. You can also use it on plywood, calcium sulphate screed, cementitious screed, and concrete. Sandblasting, shot blasting or scarifying may be necessary to completely remove some of these residuesWinning by a Point: Creating Loyal Fans for your Wood Floor Sanding Business Just Like the Rugby World Cup Final 🏉

Cleaning agent: Bona Cleaning Wipes, Bona S100, acetone, ethanol. Hardened adhesive can only be removed mechanically. Remove all existing traces of adhesive residue, paint, concrete curing compounds or other contaminants that may affect the adhesive bondIn terms of eco-friendliness, both adhesives are safe for the environment. However, Pallmann P4 adhesive is a better choice for you if your customers are looking for a completely solvent-free adhesive. Which should you choose? As a water and solvent-free adhesive, Bona R848 causes nearly no swelling of the wood once it has been installed. Bona R848 adhesive 15kg is an elastic one-component silane-based adhesive with excellent rib stability for the installation of engineered or solid wood floors (solid wood floors up to 190 mm wide boards).