Depending on the function of the connected devices, the following main functions available on Music Center:

Speakers - Cheap Speakers Deals | Currys Speakers - Cheap Speakers Deals | Currys

Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases: There isn't much else included in the box, save for a microUSB cable for charging. But for the low price, I don't really expect, nor do I need, much else to begin listening. Performance Clean foreign substances as soon as possible. Otherwise, it may cause the water-repellent fabric part to become discolored or deteriorate and lead to speaker malfunction. Follow this maintenance procedure to clean salt, sand, and other foreign substances from the water-repellent surface of your speaker:Put your speaker on a soft, dry cloth with the logo facing down to drain any water collected inside the speaker.

Unable to pair the speaker with a BLUETOOTH device - Sony Unable to pair the speaker with a BLUETOOTH device - Sony

The speaker is not resistant to water pressure. Don't perform this step using high water pressure, such as in a shower. The speaker can be paired with up to eight devices. If a new device is paired after eight devices have already been paired, the paired device with the oldest connection time is replaced by the new one. When pairing with a BLUETOOTH device that cannot display a list of detected devices or that has no display, you may be able to pair the device by setting both the speaker and the BLUETOOTH device to pairing mode. At this time, if a passkey is set besides “0000” on the BLUETOOTH device, pairing cannot be done with the speaker.

The last two ports are ones that you'll find in pretty much every Bluetooth speaker out there. You have the 3.5 input for wired listening and a microUSB port for charging the device. For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device. The pairing mode of the speaker is released after about 5 minutes and the (BLUETOOTH) indicator flashes slowly. However, when pairing information is not stored in the speaker, such as at the factory settings, the pairing mode is not released. If the pairing mode is released before finishing the process, repeat from step 2. I say "if" because that's not the only way to orient the speaker. Looped through the bottom right corner is string that leads to a silicon hook. I enjoyed the versatility of this speaker yielded by its simple, silicon loop. It made bringing the speaker around on adventures easy and even kind of fun. The speaker can be paired with multiple devices, but can only play music from one paired device at a time.

Sony SRS-X11 review: A tiny cube Bluetooth speaker - CNET

The SRS-X11 prides itself in being able to hang out anywhere, so long as there's somewhere to hook it. It can also provide a pleasant experience in terms of its sound performance, battery life, call quality and overall ease of use. I don't talk about the bottoms of speakers often, as there's usually nothing to see. But on the SRS-X11, Sony cleverly put the status indicators to face downward, which reflects nicely if you're resting the speaker on a reflective surface. Note: Connect the speaker within 30 seconds. After 30 seconds, the Wireless Party Chain setting is canceled. You'll hear a beep, and the Bluetooth icon indicator flashes and the WPC indicator lights up, and the Bluetooth icon indicator turns off. The sound quality may change if water enters the speaker section of the system. This isn't a malfunction.