A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The EasySeal self-adhesive roofing system has been designed to remove the requirement for hot bitumen and or naked flames for anyone installing roofing membranes. EasySeal is a two-layer high performance system, which was originally developed for small roofs, such as those over garages, porches, extensions and dormer windows etc. However, the fire-safe benefits of EasySeal are equally applicable for large projects. The self-adhesive application process, using no hot bitumen, gas torches or large amounts of messy liquids, makes it an ideal option for experienced contractors or competent DIY installers alike. We can only provide a delivery date and are not able to confirm the time delivery will be attempted. Therefore, we ask that somebody is able to accept and sign for your items throughout the started delivery date.

In most cases, one can will seal systems that have lost all refrigerant in as little as seven days and is designed for large systems up to 5 tons. For systems 1.5 tons to fractional, use A/C EasySeal-SS. For commercial systems with refrigerant charge of 125 lbs. – 250 lbs., use A/C EasySeal-XL. NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Ultimate to service port and inject refrigerant through injector into system while charging.Paving, Pointing & Grouting We offer a range of pointing and grouting materials for jointing your patio slabs, outdoor paving or driveway including flowable slurry grouts such as UltraScape Flowpoint, brush-in grouts like EasyJoint and gun injected mortar for fine pointing. As well as supplying paving primer, sealants and paving and driveway cleaners.

For those who need to install roofing membranes, but want to avoid the hassle and experience requirements that ‘torch-on’ methods such as hot bitumen or use of naked flames usually bring with them, the BBA approved IKOR Easyseal self-adhesive roofing system is absolutely for you. An extremely versatile product guaranteeing an excellent performance on any flat roof it is applied to, this excellent product is made up of a polyester reinforced aluminium core and a bitumen coating. Manufactured from a polyester base with an SBS (Styrene Butadiene Styrene) bitumen coating, this Easyseal roofing top sheet also features an upper surface with a special finishing of slate mineral. The release film protects the underneath of the sheet and can easily be removed with ease when installing to BS 8217: 2005, 'Code of Practice for Reinforced bitumen membranes for roofing' and IKO fixing guidelines. Features & Benefits: IKO Easyseal / Coldseal Self-Adhesive Top Sheet Roofing Felt - 6m x 1m Apply generous even coats with a long pile roller to the natural stone at a coverage rate of 4-5m2 per litre. Do not allow the product to pool or the final appearance may not be even in colour on the paving to be enhanced and sealed With a two-layer system, Easyseal systems are ideal for smaller roofing applications, including porches, garages, extensions and dormer windows. They are also usable on larger-scale applications due to the easy no-fire installations as per IKO's 'Step by Step' fixing instructions. Apply a second coat whilst the sandstone remains damp from the first coat. Timing depends on temperatures and the type of stone* (This sealer enhancer is suitable for most types of natural stone).Located in the North East of England, Easyseal UK are a well established company providing effective solutions to all your industrial roofing & wall-cladding problems, plus asbestos roof renovation. Approved contractors for numerous manufacturers of liquid coating and single ply membrane waterproof systems, Easyseal have carried out projects across the entire United Kingdom. Services we provide include: