If cleaning is carried out a few hours after applying the grout, it may be necessary to leave it standing for longer (at least Expansion and movement joints on walls and floors must never be filled with Mapei Ultracolor Plus. Use a suitable flexible sealant from the MAPEI range.

of a 3 kg drum of Kerapoxy Easy Design), powder pigment based on very high-quality pearlescent mica, to create a Mapei Kerapoxy Easy Design is ideal for grouting ceramic tiles, glass mosaics and stone materials with grout joints measuring from 1 to 15 mm wide. It can also be used as an adhesive. Pour the catalyst (component B) into the container of component A and mix well until a smooth paste is obtained. We

TILECLOUD CUSTOMER PROJECTS

All Mapei Ultracolor Plus grout colours are also available in a matching silicone – Mapesil AC Silicone. If using this grout with moisture sensitive natural stone tiles, a low modulus silicone is advised – Mapei Mapesil LM Silicone. Obstructions e.g. steps, lifts, gravel paths and drives etc may mean the delivery will have to be made to the nearest available location to the delivery vehicle. different intensity and shades. It is recommended to carry out preliminary tests since the result may vary based on the Kerapoxy Easy Design may be mixed with Mapecolor Metallic, available in pre-dosed sachets (90 g, equal to 3% by weight Certified according to ISO 22196:2011 as a grouting mortar protected against the formation and proliferation of microorganisms.

Mapei Kerapoxy Easy Design Epoxy Tile Grout is a two-component, epoxy resin-based decorative grout, with glass micro-spheres and other special components. It has an excellent resistance to acids, easy workability and is very easy to clean. The use of a Scotch-Brite abrasive pad instead of the traditional cellulose sponge for cleaning joints is recommended in We reserve the right to impose a re delivery charge on all failed deliveries where customers are not present on the arranged delivery day. Parcel Deliveries In the case of very large floor surfaces, finishing may be carried out by wetting the surface and using a single-head rotaryMapei Ultracolor Plus is suitable for grouting walls and floors in areas that are subject to intense traffic, such as shopping centres, airports, restaurants and other public spaces. It is also suitable for residential use in all areas, such as facades, balconies, terraces and swimming pools. recommend using a low-speed electric mixer to guarantee perfect blending, and to avoid overheating of the mix which For Mapei, “zero impact on climate change” means that CO 2 emissions measured throughout the life cycle of ULTRACOLOR PLUS using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of renewable energy and forestry protection projects. A commitment to the planet, to people and to biodiversity. Before grouting, make sure the installation mortar or adhesive has set and that most of the moisture has evaporated. Mapei Kerapoxy Easy Design is not harmed by damp from the substrate, but the joints must not be wet when grouting.