The MagicFiber Microfiber Cleaning cloth is safe on delicate lenses and screens. It easily removes trapped human hair, fingerprints, oil, dust, dirt, and smudges. This cleaning solution can remove dirt, grease, dust, smudges, and fingerprints. Use the screen cleaning cloth to clean the affected area, and your device will become brand new again. You can use the brush to clean any stubborn stains. For example, if you’re cleaning the touchpad, you’ll need to clean it every time you use it. But, if you’re cleaning your display, you can leave it alone for up to 30 days. You don’t have to do this, but it’ll help you access the fan better so that you can issue a more thorough clean. But it’s an extra step that isn’t 100 percent necessary. Using your can of compressed air, blow away any dust from your PS4. Read the instructions on your can of compressed air to know how far to hold it from the PS4. We recommend holding the can upright to minimize moisture releasing from the can.

With the PS4 Slim, the fan inside has a cover over it. You can clean it the same way as you would with the original, by blowing condensed air into the vents (while holding the fan in place) and wiping the blades with a cotton swab.

Models

All you have to do is follow the instructions provided by the manufacturer. For example, MagicFiber recommends using a microfiber cloth or non-abrasive anti-bacterial wipes to wipe down your device’s front, side, and facial interface. You should always test the cleaning solution before applying it to your device. If you notice any residue after wiping down your device, rinse it with water. How often should I clean my Meta Quest? If you removed the power supply, you’ll be able to spray condensed air into the vent in front of the fan for a more thorough clean. When spraying into this vent, hold the fan down, so that it doesn’t rotate. This will protect the fan’s motor.

To clean the fan itself, use a cotton swab to collect and remove the dust. There will be satisfying clumps that come out! Repeat for each blade. Likewise, your PS4 should be taken good care. One of the most common maintenances is to do PS4 cleaning. If there are too much dust on the device, it will trigger a series of issues like PS4 running slow and PS4 fan loud. How to clean your PS4? You can follow the steps below to do that. Step 1: What You Should Prepare for Cleaning PS4 In conclusion, if you have a Meta Quest, consider buying a cleaning kit for it. They are cheap overall and will help extend the life of your device.VR HEADSET COMPATIBILITY: LensPen AR/VR Pen and Travel Kit boasts a half inch cleaning tip and is designed for any size goggle or optic lens. The carbon cleaning tip bends to clean all corners and edges. Patented carbon cleaning formula in the cap that recharges, and self cleans every time the cap is twisted on and off. Pairs with Playstations 5 & 4 VR, Oculus Quest 2 64gb, HTC Vive, Valve Index, Rift S, Reverb, Cosmos, and all virtual reality headsets. Start by dampening a microfiber cloth in water. Better yet, dampening it with isopropyl alcohol can remove grime, grease, and stains and even sanitize your controllers. Make sure the cloth isn’t too wet, so wring it out well. This 2-in-1 Quest lens cover protector and cleaning cloth is made from ultra-fine premium materials, so it’s durable, soft, and effective. Don’t spray compressed air into the fan blades. You don’t want to spin the fan too fast. Otherwise, you could damage the circuitry. Only clean the fan blades with cotton swabs. 2. Reassemble the PS4

Wipe the disc from the center into the edges moving in straight lines. Make sure to hold the edges of the disc, so you don’t add any more dust or fingerprints. 2. Wipe With Water or AlcoholWhen cleaning a PS4 Slim or Pro, the good news is that you can remove the cover without voiding the warranty. So get inside of the console for a deeper clean! Ports, controllers, and interior fans aren’t the only issues with PS4s. The games can also get dirty to the point where they are faulty. We’ll show you how to clean fingerprints and dust off the discs so that they can hopefully work properly again. Most of the time, wiping your PS4 games with a microfiber or lens cloth is enough to remove fingerprints and dust. Make sure to use a lint-free cloth. Finally, wipe down the PS4 with a dry microfiber cloth to remove any excess dust. Voila! Your PS4 is looking sleek and clean. How to Clean a PS4 Slim and Pro Isle of Man, Isle of Wight, Northern Ireland and the Scottish Highlands) may take longer to reach you.