Cylindrical roller bearings NUP2..-E, main dimensions to DIN 5412-1, locating bearing, separable, with cage Full-complement cylindrical roller bearings comprise solid outer and inner rings and rib-guided cylindrical rollers. Since these bearings feature the largest possible number of rolling elements, they have extremely high radial load-carrying capacity, high rigidity and are suitable for particularly compact designs. Due to their kinematic conditions, however, they cannot achieve the high speeds that are possible when using cylindrical roller bearings with cage. with an intermediate ring between the outer rings and the inner rings, axial internal clearance between .. and .. inμm Tapered roller bearings 313, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs

Dimension series for FAG radial bearings (excluding tapered roller and needle roller bearings) Width series– increase in cross-sectional width Sealed spherical roller bearings WS222..-E1, lip seals on both sides, for continuous casting machines Our delivery services in Australia are through DHL, typically despatched the Same Day and with a delivery time of between 3 and 5 working days. DHL - 3-5 Day DeliveryCylindrical roller bearings with snap ring grooves are locating bearings. These bearings are very rigid and can support axial forces in both directions as well as high radial forces. The intermediate sizes, such as bore diameter d=22,28and d=32mmfor example, are also given with an oblique as/22,/28and/32. Cylindrical roller bearings NJ23..-E, main dimensions to DIN 5412-1, semi-locating bearing, separable, with cage Cylindrical roller bearings NU23..-E, main dimensions to DIN 5412-1, non-locating bearing, separable, with cage

The bearings are separable and are therefore easier to fit and dismantle. Both bearing rings can be given a tight fit by this process. Single-row cylindrical roller bearings with cage are available as non-locating, semi-locating and locating bearings. X-lifeTapered roller bearings 323, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs For certain FAG bearing types, the bearing bores are stated directly or in an encoded form in accordance withDIN623-1. Up tod＜10mm, the bearing bore diameter is specified in the dimension-specific part of the designation (basic designation) directly as a number indicating the diameter. Tapered roller bearings 322, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs