If you decide to go this route, keep your fingers clear of the lighting wheel and other metal parts of the lighter, as these become extremely hot when exposed to the flame for that duration. Flat Flame Lighters As a cigar enthusiast, you’ll eventually come to own several torch lighters of various styles, sizes, and types. Often you’ll meet enthusiasts who keep a collection, or even have lighters designated for certain occasions. Regardless, consider the importance of storing your torch lighter properly to ensure its longevity and that it still works when you return to it. now try moving everything apart, careful not to lose anything (yes my pins are made from steel wire but shh the screw came off a tiny circuit board, i didn't lose it, the screw was too long to start with.)

When you invest in a quality torch lighter, you want to make it last. To be frank, losing your lighter is a likely higher risk than poor maintenance, but you still want to make sure you get as much life out of your torch lighter as possible. This speed leads to a strong flow and can keep the flame straight no matter the position of the lighter.Leave it to the cold, windy and rainy nights of the United Kingdom to be the inspiration for a lighter, but that’s exactly the case with the TORJET from Tor Imports. A third and most recent option for creating a spark has been lithium ion battery torch lighters. Similar to piezo ignition lighters, these use an electric current to create a spark and produce a flame, but they claim to have an easier push-button mechanism than piezo lighters require. The downside, however, is that these are charged with a USB cord, and you’re not always aware of when your battery is low, opposed to a piezo ignition torch lighter. Protective Cap I love the dynastash and it's unfortunate that it can't hold a lighter but this connects to the magnet really nicely which is the next best thing.

Thanks to the air pressure from the orifice, the mixture of gas and air is ejected out of the burner hole at a dramatically faster rate. The more you know about your hobbies and passions, the more you value and enjoy the experience. Equip yourself with a well-rounded understanding of a torch lighter’s components for three reasons:Visually, torch lighters can vary by color, with some appearing plastic, fun, and with bright neon colors. Others display a more formal, elegant look. These are your more traditional styles—gunmetal or stainless steel. Consider matching the style of your torch lighter with the style of your humidor or cigar cutter . Style The fuel tank of a torch lighter stores the butane in liquid form. This takes up the bulk of the lighter and releases portions of the butane in gas form when the user activates the release and spark button. I've had the same torch lighter for almost 4 years. It's BAD ASS! I've already replaced the sparker and the hoses once, and I lost all the case screws, so I had to electric tape it together when I had problems with using hoses that were too small (they kept popping off the couplings from the pressure). Anyhow, NOW it leaks from the fill valve somewhere. I don't know if it's the little rubber washer that prevents gas from escaping or not (though I suspect it is), but I took it all apart. I can't do anything to the bottom, as I don't have the tool it would take to remove it from the tank. I DID take apart the TOP though, and after unscrewing and removing the spring-loaded nozzle, the inner piece it screwed on to had the spring and this tiny-ass little pointy guy, that fits both nicely in the spring AND nicely in the nozzle. But it can't go in both. I turned the gosh darn WHOLE THING upside down when I was getting it outta there and didn't realize the spring and pointy guy were in there. I even dropped the spring and spent a considerable amount of time looking for it. My wife was the one to find it, actually NOT on the floor, but on the bed, where I was sitting and working on this thing.