Changing the coil in your Innokin Endura T18E tank is a simple process. Here's a step-by-step guide on how to do it: Overfilling the tank: If you overfill the tank, it can cause leaking. Make sure to fill the tank only up to the fill line, and avoid filling it to the top.

The kit includes the T18E tank, an 18mm diameter, 2ml capacity top-fill tank with Innokin Prism coil technology for an outstanding flavor profile that stays true to how liquid manufacturers intended. The Innokin Endura T18E Starter Kit is one of the most popular pen-style e-cigarettes in the UK, thanks to its stylish and simplistic looks, as well as its impressive battery life. The built-in 1000mAh lithium polymer cell provides long-lasting power, and the top-filling, leak-proof prism tank with replaceable coils ensures that you can enjoy your vaping experience without any hassle. The Innokin Endura T18E battery can be charged from a USB power adapter (not supplied), or any other USB power source. You’ll find the battery’s USB port neatly concealed behind a rotating cap on the base of the tube. The battery’s on-board safety systems even allow you to carry on vaping while recharging.Screw the top cap onto the tank, and let the device sit for a few minutes to allow the coil to fully absorb the e-liquid. When the battery is charging, the LED light on the device will be red, amber then green. Once the battery is fully charged, the LED light will turn off. It's important to note that the battery not fully charged when the LED light turns green. Therefore, users should wait until the LED light goes off before unplugging the device to ensure that the battery is fully charged. Allow the battery to charge fully. The time it takes to fully charge your battery will depend on the battery capacity and the power output of your charging source. Typically, it takes around 2-3 hours to fully charge the Innokin Endura T18E battery. If you're experiencing a burning taste when vaping, it's likely that the coil in your Innokin Endura T18E needs to be replaced. Over time, coils can become worn out or damaged, which can lead to a burnt taste when vaping. Here are some common reasons why you might be getting a burning taste from your coil:

With no adjustments needed, vaping with the Endura T18E is as simple as pressing the fire button. Traffic-light LEDs behind the button indicate the battery charge status: Green for full power, Yellow for mid power, and Red for low power. Main cause: If the coil in your tank is not installed properly or is damaged, it can cause leaking. Make sure that the coil is installed correctly and is tightened securely. Connect the other end of the charging cable to a USB port on a computer or a USB wall adapter. It's important to use a reliable and compatible charging cable and adapter to ensure safe and efficient charging. Locate the micro-USB charging port on the side of the battery. This is where you will plug in the charging cable. If you're experiencing leaking from the tank of your Innokin Endura T18E, there could be several reasons for this. Here are some common causes of tank leakage:The overall aim of the Innokin Endura T18E is to provide a harmony between portability, longevity, and simplicity. It is an excellent all-day carry device, small enough to be unobtrusive anywhere you care to carry it. Once the battery is fully charged, the LED light on the battery will turn off, indicating that the device is fully charged. It's recommended to unplug the charging cable and disconnect the battery from the charging source once fully charged.