The Galvanised steel will ensure excellent resistance to corrosion when used outside in Pergola structures. This Post Base Cover is only designed to be compatible with Framola Post Bases and MUST be installed at the same time as the Post Bases, it cannot be installed later. Using this kit you will be able to construct a Pergola using 11 pieces of wood, with a post base at the end of the 6 upright beams. To get the right Framola Pergola kit for the size of wood you are using, please select from the options "Suitable for", this will allow you to select between 4"x4" (100mm x 100mm) posts or 6 "x6" (150mm x 150mm) posts. Features 4 screw holes, each measuring 7.5mm in diameter to allow you to use Timber Sleeper Screws for installation.

To get the right Framola kit for the size of wood you are using, please select from the options "Suitable for", this will allow you to select between 4"x4" (100mm x 100mm) posts or 6 "x6" (150mm x 150mm) posts.To get the right Framola pergola kit for the size of wood you are using, please select from the options "Suitable for", this will allow you to select between 4"x4" (100mm x 100mm) posts or 6 "x6" (150mm x 150mm) posts. To get the right Framola kit for the size of wood you are using, please select from the options "Suitable for". This will allow you to select between 3" x 3" (75mm x 75mm), 4"x4" (100mm x 100mm) posts or 6 "x6" (150mm x 150mm) posts. To get the right Framola kit for the size of wood you are using, please select from the options "Suitable for", this will allow you to select between 3"x3" (75mm x 75mm), 4"x4" (100mm x 100mm) posts or 6 "x6" (150mm x 150mm) posts. Using this kit you will be able to construct a Pergola using 8 pieces of wood, with a post base at the end of the 3 upright beams and 3 horizontal beams.

The Post Base Cover is designed to sit nicely on top of the post base, whilst still allowing enough clearance for the wood to contract and expand depending on the climate and humidity. To get the right post base for the size of wood you are using, please select from the options at the top. This will allow you to select between options for 3", 4", 5" and 6" timber. Using this kit you will be able to construct a Pergola using 5 pieces of wood, with a post base at the end of the 2 horizontal beams connecting to a wall, and at the end of the upright posts.Simple and easy to install, place along the corner join of the pergola and simply screw to the wood. Using this pergola kit you will be able to construct a Pergola using 8 pieces of wood, with a post base at the end of the 4 upright posts. To make life easier for you, we also offer an installation kit which provides a drill bit, a driver bit and a selection of bolts to secure it to the ground.