Exercise Your MAKITA 14.4v Battery - Do not leave your battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above.

Breaking In New Batteries - new SENCO 14.4v batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge your new battery two to four times to allow it to reach its maximum rated capacity. There are several steps you can take to insure that you get maximum performance from your cordless drill batteries: Replacement 3.7V 4400mAh 4.4Ah Li-Ion battery for Zafferano Poldina Pro Mini Table Light, Reading Lamps and Night LightsLi-Ion Battery Replacement for Sigor Nuindie, Nuindie Floor and Nuindie Mini Table Light, Reading Lamp, Night Light Angelcare AC201 Movement and Sound Baby Monitor Replacement AAA 600mah NiMH 1.2V Rechargeable Batteries Exercise Your SENCO 14.4v Battery - Do not leave your battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above. DC18RD is a two port fast charger that is able to charge two Makita Li-ion batteries (14.4V-18V) at the same time, as fast as DC18RC charges one battery.

The new Makita 2.0Ah battery with a 30 minute fast charge time with a DC10SB charger or 70 minute standard charge time with a DC10WD charger. Charge times: 14.4/18V 3.0Ah battery in 60 mins 18V 4.0Ah battery in 90 mins 18V 5.0Ah battery in 110 mins Preventing the Memory Effect - Keep your SENCO 14.4v battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are SENCO 14.4v battery which do not suffer from the memory effect. Breaking In New Batteries - new MAKITA 14.4v batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge your new battery two to four times to allow it to reach its maximum rated capacity.Thanks to their light weight and high energy density, lithium-ion batteries are ideal for applications such as outdoor lighting and electric vehicles. Depending on the intended purpose of the battery, you can opt for a lithium-ion polymer battery or a simple lithium-ion battery with a hard case or soft case, all available online. This is a sealed lead acid battery, also known as an AGM battery. AGM (Absorbent Glass Mat) technology relies on the use of fibreglass mat between the lead plates which absorbs the sulphuric acid, making the battery spill-proof. AGM battery technology offers many advantages including improved efficiency. Angelcare AC401 Movement and Sound Baby Monitor Replacement AAA 600mah NiMH 1.2V Rechargeable Batteries The NX 3.5-4 General Purpose Battery is a maintenance-free sealed lead acid battery which offers excellent performance in float charge (permanent charge). Manufactured to the highest quality standards, the NX 4V sealed lead acid battery's AGM separators provide excellent reliability and a long service life. This 4V AGM battery meets the requirements of the leading manufacturers. For example, charging a Lithium-ion power tool battery before it is fully discharged will have little or no impact on the battery. This is not the case for NiCd batteries however, which are much more susceptible to self-discharge and memory effect (drop in performance caused by charging the battery before it is fully discharged).

The NX 3.5-4 General Purpose AGM battery can also be used for non-intensive low current cyclic use. We recommend the NX Cyclic range for more intensive cyclic use. The new Makita 4.0Ah battery with a 60 minute fast charge time with a DC10SB charger or 130 minute standard charge time with a DC10WD charger.Angelcare AC1100 Movement and Sound Baby Monitor Replacement AAA 600mah NiMH 1.2V Rechargeable Batteries Not sure which battery is compatible with your cordless drill, screwdriver or other power tool? Discover our complete power tool battery guide to help you decide!

Charge times: 14.4/18V 3.0Ah battery in 22 mins 18V 4.0Ah battery in 36 mins 18V 5.0Ah battery in 45 minsLithium-ion's long life and autonomy is mostly due to its high energy density and optimised charging process. The integrated PCM (Protection Circuit Module) protects against overcharging, polarity inversion and any eventual charger defects. You can also find a lithium-ion battery charger for your battery. Need a replacement BOSCH D-70771 or DEWALT DE9098 battery? Our search engine will take care of finding it for you. Compact and lightweight battery charger designed to charge slide type lithium-ion batteries BL1011B, BL1021B and BL1016B. The new Makita 1.5Ah battery with a 22 minute fast charge time with a DC10SB charger or 50 minute standard charge time with a DC10WD charger Charge Times: 2 x 14.4/18V 3.0Ah Batteries in 22 mins 2 x 18V 4.0Ah Batteries in 36 mins 2 x 18V 5.0Ah Batteries in 45 mins