Article 12: For those low-power radio-frequency devices that have alreadyfrequency devices that have alreadyreceived a type-approval, companies,business units or users should notchange its frequencies, increase itspower or change its original featuresand functions. Do not throw in the device with household waste. The technical equipment is subject to storage and disposal in accordance with the organization's disposal procedure.

Article 14: The operation of the low-powerradio-frequency devices is subject tothe conditions that no harmfulinterference is caused to aviationsafety and authorized radio station;and if interference is caused, the usermust stop operating the deviceimmediately and can’t re-operate ituntil the harmful interference is clear. Static IPs are assigned using the local web server on each AP. The following procedure describes how to set the static IP: All dual-band 2×2:2 outdoor APs (such as the MR74 and MR76) have two sets of mount points: the top two are for the 2.4GHz radio, the bottom two are for the 5GHz radio. Rules and conditions for the sale of equipment are determined by the terms of contracts concluded by Cisco or authorized Cisco partners with equipment buyers.

Start here. Build anything. Design your network experience.

IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Industry standard QoS features are built-in and easy to configure. Wireless MultiMedia (WMM) access categories, 802.1p, and DSCP standards support all ensure important applications get prioritised correctly, not only on the MR76, but on other devices in the network. Unscheduled Automatic Power Save Delivery (U-APSD) and new Target Wait Time features in 802.11ax clients ensure minimal battery drain on wireless VoIP phones. Self-configuring, self-maintaining, always up-to-date Sector antennas are ideal for building mounts as they target the signal away from the interior spaces of the building and focus the energy to thelarger outdoor space. This antenna is ideal for exterior building use but may also be used for some mesh network designs.

GHz 2x2:2 radio and 2.4 GHz 2x2:2 radio offer a combined dual–radio aggregate frame rate of 1.7 Gbps, with up to 1,201 Mbps in the 5 GHz band and 573 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR76 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP. Meraki offers a number of antenna options for the MR76 access point. Below is a highlight of the different antenna types and their applications. It is always best practice to consult with a Cisco SE or Partner in to select the best antenna for the unique design. Omni Directional Sector/patch antennas have two connectors. Both of these connectors must be attached to the same radio, a single sector/patch antenna should not be attached to both the top and bottom of the access point GHz 2x2:2 radio and 2.4 GHz 2x2:2 radio offer a combined dual–radio aggregate frame rate of 1.7 Gbps, with up to 1,201 Mbps in the 5 GHz band and 573 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR76 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP. Multi User Multiple Input Multiple Output (MU-MIMO)i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 34mmbetween the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The authorized radio station meansa radio-communication serviceoperating in accordance with theCommunication Act. With support for features of 802.11ax, the MR76 offers MU-MIMO and OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and improves the end user experience.