Please complete the form below for a quote - Please be as accurate as possible to help us give an accurate quote. In any event, I thought it was worth noting that the Capture Clip is not the most comfortable contraption in every single use case, with every single type of lens. There’s no stealth. Peak Design says the Capture is rated for up to 90 kg / 200 lb so safety-wise almost anything you would put on there is a non-issue. For me personally, the Hasselblad was a bit too heavy to be comfortable. But it wasn't just the weight; I also didn’t feel comfortable with the way large cameras or those with long lenses tend to pull down, potentially jabbing into your body. Bottom line

However, we recently got the Peak Design Lens Kit, which slides into the Capture Clip and securely holds two extra lenses at the ready ( psssst…. if you’re interested in this product, make sure you’re getting the right kind for your camera system. There are currently 3 different models that are compatible with Sony E mount , Canon EF-EFS mount , and Nikon F Mount). Before getting the Domke straps I used to use neoprene straps, but the camera bounces a little too much for my taste when using the neoprene strap.Submit a valuation request and we'll provide guide prices with no delay. Plus, we'll collect your gear from your home or work for FREE. Interestingly, you can see the differences between P eak Design Capture v2 vs v3 gave us some things while taking others away.

Similarly, the metal plate’s low profile is awesome—you hardly notice it when you’re holding on to your camera and I love that it’s already compatible with Arca tripods (including Peak Design’s!). Comfort Beyond just holding lenses, you can also use it as a GoPro mount to get point-of-view shots. Construction of the Peak Design Capture Clip As far as I’m concerned, the Capture Clip could be used wherever you can imagine using it. As long as there is a place the metal plates can grab on tightly, it can be used to mount your camera. The Capture Clip V3 marks a 30% reduction in size and weight over the previous model. It is thinner, narrowerandthe accompanying cameraplate ( sold separately) that has been reduced in size too.My Peak Design Capture Clip came with a standard Arca-Swiss-compatible plate, 2 hand-drive screws, 2 4mm hex screws, a hex wrench and a microfiber pouch to store everything in. There are two main locations that I’ve seen photographers attach the Capture Clip to their belt: at their hip and at the inside of their leg. 2.1. Belt-Mounted at the Hip