Next double check that the belts are tight – not too tight, just tight enough to bounce back when you press them.

To ensure bed adhesion I always wipe down the bed with IPA wipes prior to printing to ensure good bed adhesion. The magnetic bed it comes with is tricky to get prints to stick to it without some kind of adhesion help, such as glue stick or hair spray. This is a complex, flexible print with dozens of contact points – good adhesion is an absolute must. In this article, we’ll go over ten of the best upgrades you can make to the Ender 2 Pro, including adding automatic bed leveling, switching out the build plate, and more! Easier Maintenance: Pre-installed X and Y-Axis belt tension make it even easier to keep your machine printing at its best.Many users opt for the 20-25mm yellow or blue ones, as these are known to provide more bed force, leading to less frequent bed leveling adjustments. If you see the facebook group for E2Pro, you will find some people have managed to break the thread inserts that hold the hotend to the X axis carriage just by dismantling and putting back the hotend. Most of the times, I print models over night, but this printer is too loud for that and I had to use it during the day.

It’s also worth pointing out that most Capricorn tubing kits come with a few meters of tubing and a PTFE tube cutter. A glass bed won’t do this, so you can use filament materials that require higher bed temperatures (e.The Creality Ender 2 PRO was provided free of charge by Creality3DOfficial for the purpose of this review.