EdgeSwitches have an optional web interface overlay called UISP, which is similar to the UniFi controller. UISP is limited when it comes to EdgeSwitch configuration, and it doesn’t have every option that the device’s individual web GUI or CLI has. Think of UISP as an easy way to monitor all of your AirMAX, LTU and EdgeMAX devices, rather than a single interface for configuring everything like the UniFi controller. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-24-POE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere. To break the dozens of models into understandable chunks, the first thing to cover is the 1st vs. 2nd generation. An easy way to identify which generation they belong to is what their model name begins with: PoE support simplifies your network infrastructure and cabling. PoE ports offer 802.3af/at to power your PoE devices, such as UniFi APs and cameras.

24 Port Gigabit Switch Gen2 with PoE and SFP | USW-24 UniFi 24 Port Gigabit Switch Gen2 with PoE and SFP | USW-24

Ubiquiti UniFi Gen2 Switches offer a variety of features, including 10G SFP+ ports, PoE+ or PoE++ support, and Layer 3* switching capabilities. (*Layer 3 switching will be available in a future software release). Have a small touchscreen on the left side of the device, like the UDM-Pro. This screen shows stats and info about the device, and the network it is on. They also integrate with the UniFi AR feature, which lets you use a phone to virtually see what is connected to each port.The main point I’m trying to make here is that if you expect a UniFi switch to be your only layer 3 device, you’re going to be disappointed. Adding layer 3 at the switch level usually doesn’t make sense in small to medium sized networks, and I wouldn’t recommend relying on UniFi layer 3 switches in general. If you’re working on a large multi-building network with high requirements, UniFi may not be the best fit. I’ll cover this in more detail if I ever get around to finishing my USW-Enterprise-8-PoE review. The 2nd generation Pro models feature L3 support, higher PoE budgets, and 10 Gbps SFP+ or 25 Gbps SFP28 interfaces. The USP-RPS can be used for redundant power on all models that support it. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit: ui.com/toughcable PoE+ and eight PoE++ RJ45 ethernet ports have total 400W PoE budget, and two SFP+ ports offer 10Gbps uplink options. Near-silent cooling and a 1.3" touch LCM.

Ubiquiti UniFi 24-Port PoE Switch (USW-24-POE) - 4Gon

In the event of a UniFi switch power supply failure, the USP-RPS automatically supplies redundant power to the failed device. One UniFi SmartPower device can support up to 6 devices until the failed device is replaced. Deciding between UniFi, EdgeMAX, UISP, or some other brand depends on your needs. The right solution varies with what kind of network you are trying to build, and what features you need to accomplish that. If you are comfortable with command line configuration and have complex needs, another vendor is probably a better option. This guide focuses on UniFi switches, but it’s worth noting some EdgeSwitch models are the same hardware as the first generation UniFi switches, with an EdgeOS CLI and UISP instead of the UniFi controller. The newer UISP switches are not as mature, but are worth considering if you want your switch to tie into the UISP NMS and UCRM software. There’s a lot to cover when it comes to PoE, so I’ll try to keep it as simple as possible. There are 4 main types of PoE to know about:I’ll use the PoE, PoE+, PoE++ names as shorthand. It is important to consider the type of PoE you need for your devices, and to make sure that you have enough PoE budget on your switch to power all your devices. Otherwise, you will need to rely on separate power injectors. PoE Passthrough The Ubiquiti UniFi USW Pro 24-POE is a configurable, Gigabit Layer 2 and Layer 3 switch with auto-sensing 802.3at PoE+ and 802.3bt PoE++. Putting the L2/L3 differences aside, the 2nd generation pro models also have some other advantages over the non-pro UniFi switches. 2nd Gen Pro models add If you want 10 Gbps ports for clients, or need a distribution switch to aggregate other switches, the XG series has a few options. Some are in the 1st generation, some are in the 2nd: It’s also worth pointing out that PoE devices don’t always consume their maximum rated power draw. The spec sheet will specify the maximum amount the device can use, but during normal operation they won’t use that much. For example, the U6-Pro requires 802.at PoE+ or 48V passive, and maxes out at 13W. During normal use it usually consumes around 5 to 7 watts of power.

UniFi Switches Explained — McCann Tech UniFi Switches Explained — McCann Tech

The Ubiquiti UniFi USW-24-POE is a configurable, Gigabit Layer 2 switch with 24 Gigabit Ethernet ports including 16 auto-sensing 802.3at PoE+ ports, and two SFP ports. Have lower fan noise — the non-pro models are fanless. The pros have fans, but are quieter than the 1st generation models.You may choose to restrict the collection or use of your personal information in the following ways: The UniFi PoE Switch features fanless, silent thermal cooling*, so it can be deployed in areas where fan noise would be distracting.

Switch with SFP - Ubiquiti Managed PoE+ Gigabit Switch with SFP - Ubiquiti

PoE passthrough is when a PoE device can receive power and also pass PoE to another downstream device. A common example would be a 24 port PoE switch, feeding an In-Wall-HD access point, with a video camera connected to the In-Wall-HD. The key part is that all three devices are drawing their power from the 24-port PoE switch. In situations like that, you need to be especially careful about what PoE support your switch or voltage and amperage of your PoE injector. If you take a larger view, there are a lot of available options for switching in the UniFi ecosystem. If you don’t need multiple VLANs and a segmented network, there’s nothing wrong with grabbing a budget unmanaged gigabit switch and using it in your network. If you want to be able to use multiple VLANS and need segmentation and inter-VLAN routing, there’s enough variety in the UniFi switch lineup that you should be able to find something that fits your network. There’s also a lot of other brands out there if UniFi isn’t for you. We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.

System Requirements

If you are planning on using PoE passthrough on switches like the USW-Flex, or access points like the In-Wall-HD, you should supply them with the higher-wattage PoE+ or PoE++. Devices with PoE passthrough will usually function when fed with standard 15W PoE, but will not reliably power downstream devices unless they receive their maximum rated power input. For example, the USW-Flex can provide 8W with PoE in, 20W with PoE+ in, and 46W with PoE++ in. Also worth noting — if serial console out-of-band management port is something you need, the first generation switches have it, and the second generation models do not. XG UniFi Switches For information about compatible fiber SFP modules, visit: ubnt.link/UniFi_SFP_DAC_Compatibility Specifications Do not have a serial console port. All management has to be done over Ethernet in-band. (EdgeSwitches still have console ports!)