The collet snaps into the retaining ring on the collet nut. Then the nut and the collet are screwed into the end of the spindle shaft. The benefit of this comes when you remove the bit. As you make the nut lose, the collet is pulled from the bit. For Dust Management solutions that are OSHA compliant under Option 2: Compliant under Option 2, Objective Data of the OSHA standard for Occupational Exposure to Respirable Crystalline Silica (rule 1926.1153) when dust extractor is operated with the tested tool model and operated under conditions tested by Makita®. The RP2301FC has a soft-start features which allow for smoother startups. The electric brake can also help you have increased productivity while it’s in use. The plunge capacity is anywhere from 0 inches to 2 ¼ inches of plunge-depth capacity. The linear ball bearings help for smoother plunging action. The RP2301FC is for the all-around woodworker who encounters a lot of heavy-duty work daily. This router is capable of making anything from cabinets, doors, windows, and a lot more.

Enter the Makita RP2301FC, which is as precise as I’ve ever seen a handheld router to be. The rods are created out of tempered steel, the collet system is flawless, and the body absorbs all vibrations properly.You will rarely find a plunge-base router with more power than the RP2301FC’s 15-amp, 3.25-hp motor. With this amount of power, this router can work on the toughest applications on the hardest materials for prolonged periods of time without the slightest risk of bogging down. In use this is a delightful router but I have made three improvements to mine which have turned it into a SUPERB router and I hope that all manufacturers incorporate these improvements into future models. Plunge routers are nothing new. We all know what a plunge router is. It allows you to plunge your bit deeper into the wood. The crucial thing with plunging is the router’s precision. If the bit enters or exits the wood at any non-perpendicular angle, it’s going to be ruined. Many plunge routers are not precise enough.

One of the key features of the RP2301FC is its variable speed control, allowing users to adjust the cutting speed according to the task at hand. This ensures optimal results and prevents any potential damage to the material being worked on. The depth adjustment system provides precise control over the depth of cuts, making it suitable for a wide range of applications. I have a 3612C which I use for hand held work only. I have a Triton TRA001 mounted in a table with no lift. You don't have permission to access "http://www.homedepot.com/p/Makita-3-1-4-HP-Plunge-Router-with-Variable-Speed-RP2301FC/202757224" on this server.Here is Bob's answer: "Yes the Raizer will work in the new Makita RP2301FC. I do not have the instructions for this router yet but it's a very easy install which only requires one different step than the Makita 3612. For the RP2301FC the #1 Mainshaft is cut to 12" overall length, and after removing the original sub base you remove the 10mm nut to remove the original height adjustment rod. You must then enlarge that hole to 5/16". The #39 long housing bushing is used in place of the #16 short housing bushing to secure the #19 short drive nut. Other than this installation is the same as the Makita 3612. I'm new to this forum so not quite `sure of the procedure for posting. Please abide with me if I make any mistakes. As a global supplier of a comprehensive range of tools for creating comfortable homes and living environments, Built in fan with labyrinth construction minimizes dust from entering the tool for longer tool life The RP2301FC is engineered with an increased 15-amp power, has easy-to-use features, and has an increased plunge capacity which allows you to use it in a wide range of different applications with windows, cabinetry, fine woodworking, doors, and much more.

Durability is a key aspect of the RP2301FC, with its rugged construction and premium materials. This milling machine is built to withstand heavy use and is designed to last. The ergonomic handles provide a comfortable grip, reducing user fatigue during extended working periods. Variable speed routers allow you to adjust their cutting speed. You will find that useful if you work with a diverse set of materials and bits. You can speed the router up if you are working with a relatively easy material to work with like pine or slow down if you are plunging through denser materials. Upon activation, the RP2301FC will not run at the chosen speed right away. Instead, it will start “softly,” meaning it will start at a slower speed then gradually accelerate until it reaches your desired speed.It has a powerful motor that can work on the most difficult applications for long hours on a daily basis and a wide variable speed range that offer a lot of possibilities in terms of output. The comfort and ease-of-use features seem to have been planned and designed well, too.

Makita is a worldwide manufacturer of industrial power tools which offers everyone the chance to customize their tool collection with a wide range of industrial accessories. When gripping the lower portion of the handle, the handle fits your thumb, and the grip’s ribs take care of your other singers for a solid grip.A plunge router’s speed range directly affects your cutting speed and the kinds of bits you can use. The higher your speed, the faster your cut. On the other hand, the lower speed limit determines the largest bit size you can use while the top speed determines the smallest bit size permissible.