The addition of a wet look sealer is a highly decorative feature that boosts the look and feel of any space. Choosing the best wet look sealer to suit your surface is important. Choosing The Right Sealer Essential sandstone sealer satin finish – Best suited for internal and external sandstone surfaces. Can also be used on surfaces such as slate and limestone. You can use a roller or brush to apply the product depending on the one that you are comfortable working with, I personally think a roller is easier. The 5-litre sealant can keep your patios protected for up to 5 years depending on weather conditions and use. Pros Sealers that are mixed with polyurethane resin are best for a long-lasting, high-gloss finish . Acrylic is a common alternative to polyurethane. These may need reapplying more often, but are generally less expensive to buy. Less likely to kill or damage plants if product lands of them by accident (easily done when applying with a spray)

As long as the patio is thoroughly dry and clean of debris before application, it can produce a non-slip, low-sheen finish which protects the slabs from water, stains and wear. The exact area that one bottle can cover is dependent on the porosity of the patio and how the seal is applied. No. Providing you seal your surface correctly, according to the manufacturer, there are zero risks of slipping or skidding after application. It can be used in bathrooms and kitchens with stone or slate floors, as well as on concrete, slate, patios and other porous surfaces. The finished effect looks as though the stone is damp, which brings out richer tones and colours. The best patio sealers for creating a matt finish are ‘impregnating’ sealers that seal the holes in the porous patio material instead of adding a protective layer over the top. Solvent Based vs Non-Solvent Based Suitable for popular natural stone types including sandstone, Indian sandstone, limestone, slate, quarry tile, travertine, granite & moreThen of course get any remaining sand up and off the patio – you’ll probably need to wait for this to dry so you can use a soft broom to really clean it up. Apply your patio sealer SmartSeal offers a complete line of paving sealers designed explicitly for PI concrete. In my professional opinion, you’re going to do best either with acrylic solvent-based sealers, or a line blended for decorative paving. Apply two to three coats (depending on instructions) and leave sufficient time to dry between coats.

So, these are some of the best patio sealers available. With any of these products, you can easily keep your patio protected. Also, it helps you in improving your appearance. Best for a dry natural stone look (sandstone or slate): Smartseal Natural Stone Sealer – Dry Finish– best of the best for stone but do you want to pay? There are a number of different factors that are going to influence how long a wet look sealer is going to last. Generally speaking, your wet look sealer could last as long as five years. However, there are some circumstances whereby you are advised to re-apply the sealer every couple of months. This is because of the many different factors that play a role. This includes the following…Inspect the result after a few coats to see if it looks okay. If you are happy with the results then it is time to apply to remainder of the patio. You can probably get away with one of the more powerful electric pressure washer versions as they really are becoming something comparable these days! This is yet another great patio sealer we have on our list. This product is designed to provide you with advanced protection for paving. With the use of this performance sealer, you can easily seal and protect against chemicals and dirt. The 3.785 L (1 gallon) bottle contains enough sealer to do a couple of coats on the majority of small/medium patios, but a larger amount may be required for bigger areas. If you own a flagstone patio then you probably want to treat it with a good patio sealer. This product ensures the long-term durability of the flagstones while minimising maintenance, making it a worthwhile investment for anyone looking to maintain their patio paving. Preparing the Patio

To avoid disappointing results do things right. Make sure your patio is cleaned and clear of dust. Make sure it’s completely free of weeds and you’ve used a pressure washer to blast any lichen and algae out of the pores of the stone – basically do the very best to clean it as anything not removed will never be as it’ll be sealed in! Use a quality weed killer and patio cleaner if necessary. Only then, once you’ve done the leg work is it time to apply the sealer. If you don’t follow these steps, all patio sealer will seem disappointing! Rycal for me has a decent balance between cost and performance Sika and Everbuild. If you don’t want to shell out for the top notch product ergo Smartseal, this is going to do a pretty decent job at half the money. But as always, you get what you pay for in this world and with Everbuild being less money now I find this a tough one to buy. This product is a bit expensive, especially if you want to cover a large area, but it works exactly as advertised and gives a finish most other products can’t be compared to. As a solvent-free, acrylic based formula, the sealer has a limited odour and is relatively easy to apply. It can be used over many different patio surfaces including sandstone, limestone and concrete. On most surfaces, it dries to a clear and subtle matt sheen finish with limited gloss. Non-slip– It is also important to make sure that you choose a non-slip sealer. Your sealer is going to enhance your surfaces by a considerable degree. It will provide a glossy and wet look. However, just because it provides a wet look does not mean that it should be slippery. Slippery surfaces represent a massive safety hazard. A lot of accidents have happened because people have chosen slippery sealers.

Latest articles

It comes as 2 x 5 L bottles, which, according to the manufacturer, is sufficient to cover 100 m ² (each bottle covers 50 m²). However, in reality it is unlikely to achieve such expansive coverage. These sealers are made of chemicals, so it is typical for a chemical smell to appear, especially for solvent-based sealers, but it will fade after drying. The liquid has a low enough viscosity to apply with a paint/fence sprayer, which seems to produce better results compared to using a roller. Using a sprayer is also more economical in terms of product usage. At least two, if not three coats will be required, and it takes at least three hours before the next coat can be applied. This formula also hardens sand so it’ll go a long way to keeping weeds at bay for a fair while. If you take the steps above and really put the leg work in you’ll give this amazing product a chance to work to its full potential. It can seem a little odd at first why there are so many different types – surely they all do the same job?

Polyurethane sealers are particularly useful in intensive applications, such as at airports. There are joints in the runways and paving – and as you can imagine, high powered propellers will blast much of the filling away.

What Is A Wet Look Patio Sealer?

Deep clean the patio approximately one week before applying the sealer. This means power washing the slabs, clearing all dirt, and weeding. This type of product is suitable for both external and internal applications. It’s a must-have for these surfaces in your home, and we have a great collection for you to choose from here. What Are Some Of The Benefits Of Wet Look Sealing? Consider cleaning the patio with a good patio cleaning solution. These are easy to use, basically requiring you to combine with water and rinse over the patio surface. This should remove all dirt, grime, and natural growth. The Stoneworks Wet Look Natural Stone Sealer works perfectly if you just need a general sealer for different masonry surfaces. This product is advertised to give a wet look, but the finished product is not as shiny as you might expect.