Then I had to shave the new lug slightly to get it in but I am really pleased that I now have a properly working blind again without having to replace the entire blind. Details about the extent of our regulation by the Financial Conduct Authority are available from us on request. I also had to shave a bit off the clip end, but there are lugs on top of the clip which I reckon are designed to be pared down when it's too tight. Using the flat-bladed screwdriver,prise out the plastic clip-incovers from the very bottomof the runners.

SEITZ Window Blind End Clips ( Pair ) - Caravan Tech

In this Practical CaravanDIY guide, we’ll discussthe Seitz pleated combined blinds/flyscreens – sometimes known as ‘concertina blinds’. This is not ideal if you’re in the middle of an otherwise enjoyable holiday — to say nothing of being very expensive to replace. A bit hard to get the remains of the old one out (ended up just pushing it further up the track out of the way). Finance is only available to permanent UK residents aged >18, subject to status, terms and conditions apply. Once you’re happy that the runners are clean, lubricate inside them with the silicone, but take care not to over-spray.Received with locker box what a pig of a job to do but am now a fully qualified Blind End replacement person, originals just broke off upon extraction so I used a drill with 2. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.

Roller Blinds - The Caravan Warehouse Roller Blinds - The Caravan Warehouse

Once they are, the plastic end caps cannot come out again, and the screw heads won’t interfere with any of the blind unit’s workings. Practical Caravan is part of Future plc, an international media group and leading digital publisher. In either case, look at the end of the plastic cap and you’ll see two small holes that correspond with narrow slots at the end of the aluminium finger grip.mm bit to drill down the insides this forced the broken bits to the middle of the extrusion, job done. To remove it, you’ll need to take out the six screws that hold it to the wall: two on each side at the topand single ones at the bottom. The pleated blind/flyscreen can be left in-situ while you do the following job, but I find the task easier if the unit has first been removed. If any blind in your caravan has become excessively stiff, firstbe certain that this hasn’t been caused by dirty runners. I was unable to find the part anywhere, but after typing in the product number that is print on bottom if clip on google.