The Jaw Opening: The jaw opening can easily be defined as how far away the moveable jaw can move from the fixed jaw. This opening space or width between the ends of the two jaws is known as the jaw opening and it determines the clamp’s capacity.

Clamps | Woodworking Tools | Screwfix Clamps | Woodworking Tools | Screwfix

Face clamps are typically made from steel so they are very strong and durable, and as such can withstand high pressures during the clamping operation. The face clamp has a stationary jaw on one side and a moveable jaw on the other side that is controlled by an integrated lever. The location of the moveable jaw is controlled by the lever, so when the lever is pushed away from the handle the moveable jaw will move away from the fixed jaw, leading to the clamp being opened. However, when the lever is moved towards the handle, the moveable jaw also moves towards the stationary jaw and closes in on it. The Handle: The handle of the face clamp is a long piece of metal that the user holds on to while clamping the workpiece in place. The handle is sometimes covered with latex to increase the grip. The handle of the face clamp is also responsible for joining all the parts of the clamp together. You must first open the jaws of the clamp by pushing the lever away from the handle. This step will pull the moveable jaw away from the fixed jaw and creates the space needed for the workpiece to fit in. The clamp features a no-slip comfort grip, which improves your hold and protects against pinching. Both arm ends have oversized pads designed to spread out clamping pressure. We also supply 90° corner KHC-90DCC and the right angle KHC-RAC clamps.If you only need lightweight clamps for occasional projects, then you'll appreciate what a bargain you get with the WORKPRO Woodworking Bar Clamp Set. There are six clamps in the set: four 6-inch clamps with a 2-3/8-inch throat and two 12-inch clamps with a 3-1/2-inch throat. All of the clamps have steel rails and heavy-duty reinforced nylon handles. Plus, all can convert into a spreader at the press of the red button. A face clamp is made up of several parts that enable it to secure workpieces tightly and without damage. The Jaws: The jaws of the face clamp are long and curved pieces of metal that when brought together, form a C-shape. They have a stationary jaw, which remains fixed throughout the operation, and a moveable jaw, whose position can be adjusted. This article was written by Michelle Ullman, the tool expert for The Spruce. She has extensive experience not only in writing about all things related to the home, but also in carrying out various DIY projects, including landscaping, painting, flooring, wallpapering, furniture makeovers, and simple repairs around the house and yard.

What Is A Face Clamp? - Top Woodworking Advice What Is A Face Clamp? - Top Woodworking Advice

If you want a versatile clamp that works for many different types of projects, is large enough to handle even sizable pieces, and has enough clamping power to keep your project firmly in place for as long as you need, then look no further than the BESSEY 36-Inch Clutch-Style Bar Clamp But if you just want to add a few lightweight bar clamps to your collection without spending a bundle, then the WORKPRO 6-Piece Bar Clamp Set is perfect for your needs. What to Look for in a Woodworking Clamp Type The Pressure Screw: When the jaws of the face clamp are closed, the screw can then be used to adjust the amount of pressure that is released by the jaws and onto the workpiece. The face clamp comes in different sizes for different levels of clamping and these sizes are judged by certain factors, including: The throat, which is the depth of the clamp, measuring from the frame of the clamp to the tip of its jaw. This measurement determines how far the clamp can reach into the material being held.The clamping faces are what set the face clamp apart from other forms of clamps as the clamping faces are very wide, ensuring the pressure is spread very thoroughly across the width of the workpiece. The width of the clamping faces also ensures that it can hold down large-sized workpieces relatively easy and can also be used to hold thin pieces in their grip.

Clamps - Appleby Woodturnings Kreg Pocket Hole Kits - Clamps - Appleby Woodturnings

This light-to-moderate duty clamp is 36 inches long and has a 3.5-inch throat, which is the maximum depth of the jaws extending from its bar or frame. It exerts up to 1,100 pounds of clamping pressure, which is more than enough for most DIY projects. The clamp itself weighs 4.5 pounds which is a bit on the heavy side. However, it's a must-have for any carpentry or woodworking shop, whether professional or hobbyist. You will need to use at least two clamps for most projects, but the specific number of clamps to use will vary based on the size of what you're working on and the PSI required (largely based on the type of wood you're working on). Bar Clamp: Also called an F-clamp, due to its shape, the bar clamp opens much wider than a C-clamp, allowing you to hold much larger workpieces together. There are bar clamps as small as 6 inches, but most woodworkers find that 24 to 36 inches is the most useful for large projects.

Categories

Face Clamp: These clamps are something like a pinch clamp, but with a square shape and wide pads that clamp securely without marring a delicate surface. They are useful for holding delicate pieces in place for gluing or drilling. https://youtu.be/2OK87WLVlpI Video can’t be loaded because JavaScript is disabled: Kreg Automaxx Face Clamps (https://youtu.be/2OK87WLVlpI) The Length: The length of the face clamp is variable and depends on the model of the clamp. But the length is measured as the distance from the edge of the jaw to the end of the handle. How To Use A Face Clamp. There are at least 30 different types of clamps to offer various methods of applying pressure. The design of the clamp determines its type, while the material, manufacturer, and warranty of the clamp will impact its cost. No woodworking shop is complete without a wide assortment of clamps in different types and sizes. Just about any carpentry or woodworking project that goes beyond merely hammering a couple of boards together requires the use of a clamp. But while all clamps serve the same basic function—holding two or more pieces together temporarily—there are many different types of these handy tools available, each with a slightly different use or benefit. Below are some of the more common types of clamps you’ll want to consider adding to your workshop.