The host uses the MBIM_CID_MS_UICC_OPEN_CHANNEL command to request that the function open a new logical channel on the UICC card and select a specified UICC application (specified by its application ID). Carpinteri A, Cornetti P (2011) Size effects on concrete tensile fracture properties: an interpretation of the fractal approach based on the aggregate grading. J Mech Behav Mater 13(3–4):233–246

The Answer to Reset (ATR) is the first string of bytes sent by the UICC after a reset has been performed. It describes the capabilities of the card, such as the number of logical channels that it supports. The MBIM function must save the ATR when it is received from the UICC. Subsequently, the host may use the MBIM_CID_MS_UICC_ATR command to retrieve the ATR. Parameters Type The offset in bytes, calculated from the beginning of this structure, to a byte array called Response that contains the response from the SELECT. MBIM status codes are defined in Section 9.4.5 of the MBIM standard. In addition, the following additional failure status codes are defined: Status Code The InformationBuffer of MBIM_COMMAND_MSG contains the following MBIM_MS_SET_UICC_OPEN_CHANNEL structure. MBIM_MS_SET_UICC_OPEN_CHANNEL Offset The InformationBuffer of MBIM_COMMAND_DONE contains the following MBIM_MS_UICC_OPEN_CHANNEL_INFO structure. MBIM_MS_UICC_OPEN_CHANNEL_INFO Offset

Issa MA, Issa MA, Islam MS, Chudnovsky A (2003) Fractal dimension - a measure of fracture roughness and toughness of concrete. Eng Fract Mech 70:125–137 The MBIM_MS_SET_UICC_APDU structure uses the following MBIM_MS_UICC_SECURE_MESSAGING and MBIM_MS_UICC_CLASS_BYTE_TYPE data structures. MBIM_MS_UICC_SECURE_MESSAGING Type The InformationBuffer of MBIM_COMMAND_MSG contains the following MBIM_MS_SET_UICC_CLOSE_CHANNEL structure. MBIM_MS_SET_UICC_CLOSE_CHANNEL Offset The RIL interface does not provide a way to specify secure messaging. The MBIM command to exchange APDUs specifies this as an explicit parameter.

Junction boxes are another important part of the wiring diagram. These are used to connect multiple wires together. The type and size of the junction box will depend on the type of wiring being used. It is important to make sure that the junction boxes are labelled clearly so that they can be easily identified. RAIU (2010) Malahide viaduct collapse on the Dublin to Belfast line, on the 21st August 2009. Railway Accident Investigation Unit, DublinThe Sequre SQ-SW1 Spot Welder is a battery powered spot welder powered by either a LiPo or Lead Acid battery. The SQ-SW1 features a OLED display that can show high and low voltage warnings. Using the new spot welding technology, and intelligently switching automatic or manual working mode to meet different needs. It is a flexible and efficient welding tool.

Jon Cameron:1254852 wrote:With regards to what Roly was saying about the regulator, (sorry Roly id forgotten about that link), another idea may be to use the steam regulator for a mamod loco, mounted in line with the axle instead of 90 degrees to them, and control the regulator with a linkage to under the bed?? If the regulator is screwed into the whistle hole, an updated safety valve could be used, meaning the safety valve hole could be used with a Goodall type top up valve meaning longer runs, servos both mounted rearward, and controlling their functions through linkages. Win win :DThe InformationBuffer of MBIM_COMMAND_DONE contains the following MBIM_MS_ATR_INFO structure describing the answer to reset for the UICC attached to this function. MBIM_MS_ATR_INFO Offset If the host specifies the MBIMMsUICCPassThroughDisable passthrough action, the function resets the UICC and, upon UICC power up, treats the UICC as a regular Telecom UICC and expects a Telecom UICC file system to be present on the UICC. Shoupeng S, Peiwen Q (2007) A fractal-dimension-based signal-processing technique and its use for nondestructive testing. Russ J Nondestruct 43(4):270–280 The host uses MBIM_CID_MS_UICC_APDU to send a command APDU to a specified logical channel on the UICC and receive the response. The MBIM function should ensure that the logical channel was previously opened with MBIM_CID_MS_UICC_OPEN_CHANNEL and fail with status MBIM_STATUS_MS_INVALID_LOGICAL_CHANNEL if it was not.