Over-voltage protection, effectively preventing other high-voltage power inputs from damaging the connected devices

In addition to the SSD, the Anker PowerExpand has an HDMI out port and two USB 3.x Type-A ports that operate at 5 Gbps. There’s a USB-C power pass-through you can plug your laptop’s power adapter – up to a 100-watt unit – so that you can charge your computer while using this hub (the USB-C port does not work for data transfer; we tried). Some USB-C hubs go further by incorporating USB-PD passthrough. Here the idea isn’t so much to power the connected devices as to power the laptop the hub connects to, so that you just connect the laptop to the hub, and it charges as you use it without the charger taking up the spare USB-C port. The key thing here is how much power the hub can supply. Most will deliver 80W or more when used with a 100W charger, which should more than cover any laptop. However, with some you’re looking at 50W or less, which might mean missing out on fast-charging modes on some of those laptops that support them. Defines multi-lane operation for new USB 3.2 hosts and devices, allowing for up to two lanes of 10Gbps operation to realize a 20Gbps data transfer rate, without sacrificing cable length

Specifications

If you have a USB 3.2 Gen 2 port and want to take advantage of its 10 Gbps speed, look for a cable that supports 10 Gbps (it could be USB 3.2 Gen 2 or USB 3.1 Gen 2) and a peripheral that does the same. If you want to get 20 Gbps speeds, all three pieces: the port, the peripheral and the cable, must support that speed. What Can I Do with USB 3.2 or USB 3.1? Most importantly, the ssk usb hub is designed for small size, is used for transfer rate, It is lightweight and has a compact design. Similar to the Sabrent HB-U3CR, the Atolla delivered 1.2 amps at 4.8 volts on our power test and it charged our phone at 4.78 volts and 1.35 watts. The Atolla hub also offered similar performance to other hubs; we detected no slowdowns when copying files with our test SSD. Take some of the claims made by some manufacturers with a pinch of salt. We tested a couple of hubs that promised high-end features but failed to deliver during testing. For example, they might promise 4K at 60Hz, but you might find that this only works on specific laptops and displays.

USB Type-C has plenty of perks, and with one of the USB Type-C hubs you might be considering getting, you'll be able to copy files at USB 3.1 speeds, deliver enough power to charge a laptop, or use Alt Mode to send other types of data using DisplayPort or Thunderbolt 3connections. Unlike cheaper hubs, it supports a full 60Hz refresh rate over HDMI, while there’s a Gigabit Ethernet RJ-45 port for when you need a physical network connection. The Type-C and Type-A connections could be faster, with our SSD speeds limited to around 458MB/sec, but this is a great, fully featured hub that’s still affordable and – most importantly – it just works. Essentially, it's a tiny, super-fast connector that many of the best laptops today have a connector for, with the only downside being that USB A or USB B connectors can't be used with a USB Type-C port (that's where a USB Type-C hub comes in handy). Anyone who works with microcontrollers such as the Raspberry Pi Pico or any Arduino board knows that most of these devices don't have on / off switches or even reset buttons. So, if you change code and need to restart them or you just want to power them off, you often need to yank the plug in and out, a huge hassle that could damage your gear. But with the Sabrent HB-B7C3, you can just toggle power on whatever port your microcontroller is plugged into.In 2013, USB-IF announced that it was taking USB up to 10 Gbps and, in doing so, changed the version number for all USB 3.x products. So USB 3.0 (5 Gbps) became USB 3.1 Gen 1 and the new, 10 Gbps speed became USB 3.1 Gen 2. Industrial grade HUB chip, adopting MTT technology, allows stable and smooth 4x concurrent USB connections