Our Green Premium eco-mark encompasses a broad range of environmental criteria, meeting and exceeding international regulations and industry standards:

The thermostat can be mounted to the stand or to the wall clip in a location where it will be able to control the room temperature. When wall mounting, the thermostat should be placed around 1.2m (4ft) off the ground and away from windows and radiators. For example, if a householder understands when their heating is due to come on and when it is scheduled to be off, as well as how to alter the time settings, then they should be able to manage their system timings without your assistance.When batteries are running low, a low battery icon will flash in the display. During this time, miGenie will function normally. Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers?

When used together, the frost and pipe thermostats ensure that the boiler is automatically switched on when the temperature drops to a dangerous level and runs until the system water temperature has been sufficiently raised. Thermostatic radiator valves (TRVs) are an important part of the central heating system, as they allow householders to control the temperature of each individual room through the radiator.The miGenie gateway is designed to be placed on a flat surface and should be located next to the customer’s internet router.