If you choose to ignore this rule then theres a good chance this will invalidate your home insurance and also if you come to sell your home and there are works that have no certificate to cover them, then this can cause major issues.

When the United Kingdom agreed to adopt the blue for neutral, brown for live and green/yellow for earth in flexible cables and flexible cords usually used for non-fixed installations e.g. appliances such as fridges, washing machines etc. no move was made to harmonize the colours for fixed installations in homes and other structures. Red 3' in the Works at Summit (Exclusive). Hollywoodreporter.com (2013-05-17). Retrieved on 2013-12-28. The domestic single-phase electrical supply is AC or alternating current. This essentially means that the voltage supplied over a circuit varies. Sometimes there’s a constant supply and sometimes there’s no supply. If after removing your light fitting you don’t take note of where each wire is supposed to go or after connecting everything up there’s a problem, you will need to diagnose what’s going on. In most cases it will be that you have a loop in setup and you have mixed up the wires and the switch live isn’t in the correct terminal.

To avoid issues such as this, with a 3-phase supply there is effectively 3 separate live wires supplying electricity and as each is slightly out of phase by a third of a cycle, the electrical supply will always be constant and uninterrupted. Mixing any of these up and connecting them to the wrong terminal can be catastrophic and potentially deadly, hence the reason we have mentioned this once again! In electrical wiring there are essentially 2 common types of cable you will encounter; 2 core and earth and 3 core and earth. 2 core and earth (or twin and earth as it’s also known) is generally used for wiring radial and ring main circuits whereas 3 core and earth is used mostly in 2-way lighting setups. For the few jobs you can do, if you would like to find ot more about staying safe when working on or around electricity, see our electrical safety project here. What Have Wire Colours Changed to?

When connecting into existing circuits that still have the old wiring colours but you will need to use cabling with the new colours, it’s essential to know exactly how to mate the correct wire to it’s old equivalent, hence why we are reiterating the old wire colours once again! Take your new light fitting and unscrew the pendant cover from the base and slide the cover down the length of flex and then using a small flat blade screwdriver, loosen each of the terminal screws enough to ensure you can get the required amount of wires in there.The cable runs from the consumer unit, to the first light fitting in the ceiling of that floor, it enters the ceiling rose where it is looped in and out to feed the next light and so on. Into this market driven by nostalgia and the need for pension plans comes Red 2, a sequel to one of the more slow-burning hits of 2010. Reuniting the original cast with a couple of new faces, it aims to bring a more overtly comic-book feel to a sub-genre built around nuts-and-bolts action thriller plots. The result is a little disappointing, not to say a little dull, but it's not without a few good moments. In May 2013, Lionsgate re-signed Jon Hoeber and Erich Hoeber to write a third installment. [30] In 2015, NBC announced that they were developing a Red TV series with the Hoeber brothers, Lorenzo di Bonaventura, and Mark Vahradian. [31] However, no further information about the development has been announced and with Bruce Willis' retirement due to health issues in 2022, a third film is unlikely. There are very strict rules on what you can and cannot do in your home in terms of electrical work and for very good reason! Electricity is highly dangerous and if you don’t know exactly what you are doing it’s always best left to the professionals.

core and earth cable is commonly used in domestic lighting circuits for 2-way lighting e.g. 2 light switches that operate the same light or other situations where switched and permanent lives are needed as well as a neutral. It’s important to state that the change in wire colour only applies to new installations and not existing ones, so many properties built before this date will still feature wires with the old colour scheme. Case 3 involves a right rotation on the grandparent. In the following graphic, the node to be rotated about it labeled "ROTATE", the inserted node is labeled "INSERT", and a third node "MIDDLE" has been labeled to show where it ends up after the rotation.The action was thrilling. Along with the jokes, non-stop action to get your blood pumping filled this film. They kept the same feel of cool, unreasonable stunts and explosions from the first movie, but they also added a lot more hand-to-hand combat, which was still very amusing to watch and excellently choreographed. As the new rules regarding wire colour that were introduced in 2006 were only for new installations and not existing then this ultimately leads to the fact that some homes will have cables with both old and new wire colours. Wigler, Josh (October 26, 2011). " 'Red 2' Targets August 2013 Release, Plot Revealed". MTV News. Viacom. Archived from the original on June 12, 2012 . Retrieved May 11, 2012. There are several different types of wire and cable that are used in domestic and industrial wiring situations and they include 2-core, 3-core, 4-core and 5-core, the most common being 3-core and 4-core. 2-Core Wire

Simply copy that into your own RA2.ini file and adjust the screen res to match yours if it is lower. core cable isn’t that commonly used and is found more often than not in SWA or steel armoured cable that’s generally used for underground or outdoor applications. Other than that it’s used in more industrial 3-phase electrical systems where 3 live wires are needed. Warner, Kara (March 29, 2011). "Helen Mirren Says She's Ready For 'Red' Sequel: 'Just Get Me The Script' ". MTV News. Viacom. Archived from the original on May 15, 2012 . Retrieved May 11, 2012.

Can I Change a Light Fitting Myself?

An important point to make is that ceiling roses and light fittings sometimes get confused and although they are part of the same object they are slightly different. The job of the ceiling rose is to conceal the wiring whereas, the light fitting is the part that hold the bulb. Once fitted, separate out the wires into groups (if more than 1 per type e.g. live, neutral etc.), using your labeling and pictures to ensure the right wires are together and then, a group at a time, pop them into the correct terminal and tighten the retaining screw. Repeat this for each group. A light fitting or light fixture as it’s also known is the section of the light that holds the bulb in place and fixes it to the wall or ceiling. The green and yellow wire is also referred to as the earth wire and has a key safety function. Electricity being transferred around any property will always take the path of least resistance to the earth. Damage to live or neutral wires could increase the risk of electrocution as the electricity may pass through the human body along its earthing path. However, this is prevented by the green and yellow earth wire as it effectively earths the electrical appliance. To successfully replace a light fitting in your home you will need the following tools and products: