While playing a first person shooter with jitter would be bad enough, unfortunately they have bigger problems. The DolphinBar uses an absolute coordinate system, just like a drawing tablet or a touchscreen. Absolute coordinates are very simple - the bottom left corner is used as a fixed point of reference (0,0) and all points along the 2D surface are coordinates to the right and up from that point in X and Y values. Speed and direction are essentially irrelevant, since the computer always has the fixed point to compare to and just measures its distance from that point at all times. There has never been an ideal solution for sensor bars. The sensor bar on the Wii is just a set of IR lights, it should be easy! It's not. Third party sensor bars are usually battery powered, and that means they chew through batteries like crazy, have automatic shut offs, and generally aren't as bright as the original Wii sensor bar. There are some USB sensor bars on the market, but generally they are battery first, USB second, and STILL turn off automatically regardless of external power! And that's not even including sensor bars that can't even get the LEDs right. The situation with sensor bars has been so bad, just turning on a Wii and using its sensor bar is the preferred solution for many.

Although the KIMILAR Replacement Wii Motion Sensor Bar is wired and not wireless, we were intrigued to see how it would measure up. It’s an exact working replica of the OEM Nintendo Wii Motion Sensor Bar. From the get-go, it was evident that this was a no-fuss, straightforward gadget. With a fully-wired connection, we were spared the hassle of dealing with batteries – just plug it in and you’re ready to play.Update: Since the creation of this article, Bluetooth Passthrough has been created as a new option for Wii Remote connectivity. By taking over the drivers of a Bluetooth Adapter, it allows unprecedented support for Wii Remote features, including the speaker and even 3rd party Wiimotes. However it doesn't work on all bluetooth adapters, and requires some setup to work. Even though it may not be the best option anymore, the DolphinBar remains a very easy all-in-one option for Wii Remote functionality, and we still recommend it for users. The DolphinBar does not current work with Bluetooth Passthrough. The Wii sensor bar allows the Wii Remote to function as an accurate pointing device. It uses the Wii Remote's image sensor to locate the points of light emitted by the sensor bar. This enables precise control and interaction with the Wii console, even from a distance of up to 5 meters. 3. What is the best position for the Wii sensor bar? The DolphinBar, in "Mode 3", allows users to use a Wii Remote, Wii Remote + Nunchuk, or a Wii Classic Controller as a system-level DInput gamepad, which can be set up like a 360 controller or any other gamepad within Dolphin's GCpad config. It is completely fluid, just like on a Wii - if all you have is the Wii Remote plugged in you have the Wiimote buttons to use, plug in a Classic Controller Pro and those buttons are usable. As a bonus, Mode 3 will work with other emulators and some PC titles as well, making Wii Remotes and accessories much more robust in the PC environment. Note that a 200 Ohm resistor will be difficult to find. 220 Ohm will probably be easier and cheaper.

So in this video I’m going to show you how we can emulate the complete Wii experience using your PC. For this you are going to have to buy some specialist parts as your normal controllers just won’t give you the full experience. There are some games you can play with something like an Xbox controller, but you’ll be missing out on the whole point of gaming on the Wii. Parts You’ll NeedSOONORY Replacement Wii Wireless Sensor Bar– The best wireless replacement currently available. Runs off 4 AAA batteries and works incredibly well. Speaking of USB compatibility, this MayFlash sensor bar connector has a USB plug that allows it to easily connect to your computer and be used for emulation. It’s compatible with the original Wiimote and Nunchuk along with the Wii classic controller as well. The resistor will convert the current into heat. It's power dissipation will be 3V * 0.015A = 0.045W Once you’ve got that selected press the 1 and 2 buttons on the Wii Remote and it should start flashing it’s blue LEDs at you. This means it’s in pairing mode.

While the earlier Wii Remotes may seem easier to use, it must be noted that the -TR Wii Remotes have more lenient with Wii Remote audio timings and may result in slightly clearer Wii Remote audio under emulation. KIMILAR Replacement Wired Wii Motion Sensor Bar– A popular and reliable wired option that’s plug and play and ready to go.

28 Comments

To get a full Wii setup you’ll need a Wii remote (called a Wiimote) with the Nunchuk attachment and a USB powered sensor bar. Your PC needs to have Bluetooth so if you haven’t got that built in you’ll need a Bluetooth dongle.