After you’ve turned on your router, you must connect your extender to it. To accomplish this, simply connect both of your devices using an Ethernet wire. Cliff Joseph is a former Editor of MacUser magazine, and a freelance technology writer with 30 year’s experience in the industry (and old enough to remember when Apple was close to going bust…). That’s a bit confusing, but the app does allow you to change the name of the range extender network to something that’s easier to remember. Let’s keep it simple by calling it 'Range Extender 2.4GHz' and 'Range Extender 5.0GHz'.

How to watch today's Apple October 'Scary Fast' event live - will we see new M3 MacBooks and iPads? You’ll also need to repeat the process for the 5GHz band as well. Once this is done, the range extender is linked to the router on both Wi-Fi bands, and this allows the range extender to act as a kind of relay so that your computers and mobile devices in rooms that normally have poor Wi-Fi can now link to your router via the range extender. 6. Network names For example: if you live in a two-story house and your router is on the main floor in the living room, an ideal spot for the extender is plugged into an outlet at the top of the stairs. This will give it a fairly reliable, line-of-sight connection to the router, while rebroadcasting its wireless signal to the rooms on the second floor. Michael Crider/IDG If you use the Comfast extender frequently, you may encounter certain common issues. Such inquiries are made of our professionals on a daily basis. If you are unsure, connect to the default network name (SSID), which should be listed on the extension.

In this article we will take you through how to configure your Comfast Wireless Bridge which can help you guarantee a reliable connection for a wireless CCTV system. Yes, you will need to reconfigure your extender if you replace your existing router/gateway. You can reconfigure your extender either via WPS connection or using the web GUI. GearHead Support is a technical support service for NETGEAR devices and all other connected devices in your home. Advanced remote support tools are used to fix issues on any of your devices. The service includes support for the following: Want to have a better wifi connection to your computer in a room that typically gets a weak wifi signal? After your initial setup, you can move your wifi extender closer to the device you want to connect and attempt to boost the signal. Keep in mind that the distance between the router and the extender is important.

If that works, then you should be able to connect the camera directly to the ethernet port on the Wi-Fi extender and have it connected to the internet. If the camera hasn't been set up previously, you should connect it directly to your internet router first so it can automatically configure itself, then connect it to the extender. This is where things can get a little confusing. At the start of the set-up process, the range extender’s Wi-Fi network was called TP-Link_Extender on both the 2.4GHz and 5.0GHz bands. If your router/gateway supports WPS, press the WPS button on your router/gateway for 5 seconds until the WPS indicator lights/blinks to initiate the connection. Reset the extender by pressing and holding the reset button for 10 seconds using a paper clip or pin. Once you’ve successfully linked your extender and router, get a wireless device that can connect to the extender WiFi.

Need to Contact NETGEAR Support?

Solution home SpyCameraCCTV Wi-Fi Bridges (Comfast, Engenius, Ubiquiti) Setting Up Your Comfast Wireless Bridge

To reset the Comfast extender, press and hold the reset button for 10 seconds with a paper clip or similar instrument. Once the setup is complete you should mount the access point on the highest point that you can, with as few obstructions in between the access point and the location of the WiFi device as possible. The more obstructions that are in the way, the shorter the effective range of the access point, so if you need the signal to reach 200m from the access point then it will need to be a clear line of sight to the WiFi device.This outlet is in the middle of my halfway, between the router in the living room and the bedrooms. Why not try one of our 3rd Gen WiFi bird box cameras, just remember to connect the phone to the access point! This guide will show you how to set up a one of our Comfast long range WiFi access points as an extender, which will allow you to connect a WiFi device to your internet router from a distance of 100-200m. Switching between networks isn’t too much problem for a single device, such as a laptop that may spend most of its time in a bedroom or office. However, it can be a bit of a chore with smartphones and tablets that move around a lot more.