If nothing is visibly wrong with your recoil starter, try spraying the mechanism with WD-40 and an airline. Blasting out some dirt and lubricating the moving parts might be all you need to do. I always like to start with this method if nothing stands out as an obvious issue. Before looking at the steps, you need to take to replace the pull cord, let me reveal a few tools that you should have to make the task done: If you’re having trouble with your Stihl MS180c’s pull cord, we have some tips to help you get it replaced.The pull cord is a small, thin piece of metal that runs along the top of the engine. It connects the handle to the carburetor. The cord can break or become tangled, which can cause the engine to not work properly. When and why we should replace the pull cord on a Stihl MS 180c chainsaw? There are various advantages to replacing the pull cord on a Stihl hedge trimmer. When the pull cord breaks down, it can significantly affect the overall performance of the trimmer. If this happens, it can be difficult to free the chainsaw from the cord.If you notice that the pull cord is starting to become worn or if the chain has become tangled, it is important to replace the cord as soon as possible. This will help to ensure that your chainsaw remains operable and safe. Where to buy the stihl ms 180c pull cord replacement?

It’s also necessary to remove the starter cover from the hedge trimmer. This can usually be done by removing a few screws with a screwdriver. Step 2. Examine the Pull Cord Assembly It will be obvious if there is a problem with the spring, as it will either be tangled inside the housing or it will have bent hooks at either end. The spring can rust together in really bad cases, and you’ll probably have to replace it. How to Fix a Pull Start That Won’t Retract (Do This) Find the correct size pull cord for your Stihl ms 180c saw. The pull cord size is marked on the saw frame.Two small pawls connect the recoil starter to the top of the flywheel. These two little lugs are often made of plastic and catch the flywheel when you pull the cord and then retract once you let go of the cord. The pawls move in and out with centrifugal force and need to be unobstructed and free to move. Cord Not Retracting: If the cord does not retract when you release it, it may be due to a damaged spring or cord, and both may need Stihl hs45 pull cord replacement . This is especially important if the chain has started to slip or if the chain has become damaged. A pull cord is one of the most important parts of a chainsaw. It’s responsible for starting and stopping the chain saw. If it gets worn out, it can cause serious trouble.

Follow all these steps appropriately to make sure that your trimmer runs smoothly. This way, you’ll be able to cut all the hedges with the top-notch functionality of the Stihl trimmer. Note: Make sure to keep the sparkplug boot away from the sparkplug hole when the sparkplug is removed to prevent any oil from getting into the boot. Inside the recoil starter on your lawn mower, you’ll find the recoil spring, rotor pulley, and a pair of pawls. Unfortunately, either of these parts can jam or break, resulting in your lawn mower recoil starter not retracting. Breakdowns in any of these parts can stem from general wear and tear, dirt in the mechanism, or failure of the components. Possible Reasons Why Your Mower Cord Won’t Retract I’m going to go over 4 different solutions on how to fix a pull start that won’t retract and will cover the different parts of your starter. One of these fixes should get your recoiler starter up and running again. Let’s take a look. Cleaning out the Recoil Starter

more about start systems

So, if they break, they can jam up the recoil starter and prevent the cord from retracting. To diagnose the pawls, remove the recoil starter from the engine and take a look. Clogged-Up Recoil Starter Finally, test the new pull cord by gently pulling it a few times. If the cord retracts smoothly and the machine starts up, then you have successfully replaced the pull cord on your Stihl Hedge Trimmer. It’s essential to replace the pull cord as soon as you notice any of these signs. Delaying the replacement of the pull cord can lead to further damage and more expensive repairs.