Surface Preparation: Clean surface by solvent-wiping any deposits of heavy grease, oil, dirt, or other contaminants. Surface can also be cleaned with industrial cleaning equipment such as vapor phase degreasers or hot aqueous baths. If working with metal, abrade or roughen the surface to significantly increase the microscopic bond area and increase the bond strength. Mixing Instructions: Precaution For complete safety and handling information please refer to the appropriate Materials Safety Data Sheets prior to using this product. Devcon will replace any material found to be defective. Because the storage, handling and application of this material is beyond our control we can accept no liability for the results obtained. Precautions: Please refer to the appropriate material safety data sheet (MSDS) prior to using this product. Channel Islands; Inflatable dinghy price on request Channel Islands; Flares not available to ship at this time

Proper homogenous mixing of the two epoxy components of resin and hardener are essential for the curing and development of stated strengths. Always mix the two components with clean tools, preferably of a disposable design. Warranty: Devcon ® will replace any material found to be defective. Because the storage, handling and application of this material is beyond our control, we can accept no liability for the results obtained. For small amounts use Devcon’s 28g Devtube, which comes with it’s own plunger to extrude the two components at an equal rate.

We also supply

Minute Epoxy works best on clean surfaces. Surfaces should be free of heavy deposits of grease, oil, dirt or other contaminants, or cleaned with industrial cleaning equipment such as vapour phase degreasers or hot aqueous baths. Abrading or roughing the surfaces of metals will increase the microscopic bond area significantly and optimise the bond strength. Proper homogenous mixing of resin and hardener is essential for the curing and development of stated strengths. 25 ML Dev-Tube: Devcon Epoxy Adhesives should be stored in a cool, dry place when not used for a long period of time. A shelf life of 3 years from date of manufacture can be expected when stored at room temperature 22ºC in their original containers. Typical Physical Properties: Technical data should be considered representative or typical only and should not be used for specification purposes. Cured (7 days at 75 °F)